✦ LIBER ✦

Influence of nitrogen on the tendency to packing defect formation and the temperature dependence of the thermoelectromotive force in Fe-Cr alloys

✍ Scribed by L. M. Kaputkina; V. V. Sumin; K. O. Bazaleeva

Book ID: 110124186
Publisher: SP MAIK Nauka/Interperiodica
Year: 1999
Tongue: English
Weight: 34 KB
Volume: 25
Category: Article
ISSN: 1063-7850
DOI: 10.1134/1.1262704

No coin nor oath required. For personal study only.

📜 SIMILAR VOLUMES

The influence of temperature on σ-phase

The influence of temperature on σ-phase formation and the resulting hardening of Fe–Cr–Mo-alloys

✍ F.B. Waanders; S.W. Vorster; H. Pollak 📂 Article 📅 1999 🏛 Springer 🌐 English ⚖ 68 KB

Influence of the temperature and rate of

Influence of the temperature and rate of generation of point defects on the processes of deformation-induced segregation in the Fe-Cr-Ni alloy

✍ S. A. Starikov; A. R. Kuznetsov; V. V. Sagaradze; V. A. Pechenkin; I. A. Stepano 📂 Article 📅 2010 🏛 SP MAIK Nauka/Interperiodica 🌐 English ⚖ 174 KB

The influence of alloying elements on th

The influence of alloying elements on the chlorine-induced high temperature corrosion of Fe-Cr alloys in oxidizing atmospheres

✍ A. Zahs; M. Spiegel; H. Grabke 📂 Article 📅 1999 🏛 John Wiley and Sons 🌐 German ⚖ 448 KB 👁 3 views

The influence of tempering temperature o

The influence of tempering temperature on the reversed austenite formation and tensile properties in Fe–13%Cr–4%Ni–Mo low carbon martensite stainless steels

✍ Yuanyuan Song; Xiuyan Li; Lijian Rong; Yiyi Li 📂 Article 📅 2011 🏛 Elsevier Science 🌐 English ⚖ 860 KB

The influence of tempering temperature on the reversed austenite formation and tensile properties are investigated in Fe-13%Cr-4%Ni-Mo low carbon martensite stainless steel in the temperature range of 550-950 • C. It is found that at the temperatures below 680 • C, the reversed austenite formation o