𝔖 Bobbio Scriptorium
✦   LIBER   ✦

Influence of natural ester on thermal aging characteristics of oil–paper in power transformers

✍ Scribed by Lijun Yang; Ruijin Liao; Caixin Sun; Huigang Sun

Publisher
John Wiley and Sons
Year
2010
Tongue
English
Weight
312 KB
Volume
20
Category
Article
ISSN
1430-144X

No coin nor oath required. For personal study only.

📜 SIMILAR VOLUMES

A comparative study of thermal aging of
A comparative study of thermal aging of transformer insulation paper impregnated in natural ester and in mineral oil
✍ Ruijin Liao; Shuaiwei Liang; Caixin Sun; Lijun Yang; Huigang Sun 📂 Article 📅 2009 🏛 John Wiley and Sons 🌐 English ⚖ 297 KB

## Abstract Aging of two kinds of transformer insulation paper in natural ester is compared to that in conventional transformer oil (mineral oil). Sealed aging vessels containing copper, insulation paper (Kraft paper and thermally upgraded paper), and dielectric fluid (mineral oil and natural ester

Influence of a solid/liquid interface on
Influence of a solid/liquid interface on electric conduction characteristics under nonuniform field in transformer oil
✍ Ryoichi Hanaoka; Masaichi Kumazaki; Toshiyuki Kohrin; Tomokazu Miyagawa 📂 Article 📅 1998 🏛 John Wiley and Sons 🌐 English ⚖ 154 KB 👁 3 views

Electric conduction in transformer oil is significantly affected by the presence of a solid/liquid interface. Using a bladeplane electrode geometry, the influence of an insulator inserted along the plane of symmetry of an electrode gap on conduction currents in transformer oil was investigated. Alth

Influence of precipitated silica on dyna
Influence of precipitated silica on dynamic mechanical properties and resistance to oil and thermal aging in CPE/NR blends
✍ Sirichai Pattanawanidchai; Pongdhorn Saeoui; Chakrit Sirisinha 📂 Article 📅 2005 🏛 John Wiley and Sons 🌐 English ⚖ 263 KB 👁 2 views

## Abstract Blends of 80/20 CPE/NR filled with various silica loadings were prepared, and their properties were determined. It was found that cure properties are influenced significantly by the addition of precipitated silica. Scorch time and cure time decrease with increasing silica loading, which