✦ LIBER ✦

Influence of moisture and partial discharges on the degradation of high-voltage surge arresters

✍ Scribed by Krystian Leonard Chrzan

Publisher: John Wiley and Sons
Year: 2004
Tongue: English
Weight: 183 KB
Volume: 14
Category: Article
ISSN: 1430-144X
DOI: 10.1002/etep.15

No coin nor oath required. For personal study only.

📜 SIMILAR VOLUMES

Comparison of the capabilities of metal

Comparison of the capabilities of metal oxide and conventional high voltage surge arresters

✍ Guy St-Jean; Yves Latour 📂 Article 📅 1984 🏛 Elsevier Science 🌐 English ⚖ 670 KB

Numerical modelling for investigation an

Numerical modelling for investigation and optimization of a sensor for sensitive partial discharge detection on high-voltage XLPE cables

✍ R. Heinrich; R. Jobava; W. Kalkner; A. Gheonjian 📂 Article 📅 2007 🏛 John Wiley and Sons 🌐 English ⚖ 548 KB

## Abstract Based on experimental investigations a theoretical model of a sensor for partial discharge (PD) detection on high‐voltage cross‐linked polyethylene (XLPE)‐insulated cables respectively joints has been developed. The model handles radial symmetric sensors and is based on the Finite‐Diffe

The temperature mobility degradation inf

The temperature mobility degradation influence on the zero temperature coefficient of partially and fully depleted SOI MOSFETs

✍ L.M. Camillo; J.A. Martino; E. Simoen; C. Claeys 📂 Article 📅 2006 🏛 Elsevier Science 🌐 English ⚖ 184 KB

The zero temperature coefficient (ZTC) is investigated experimentally in partially (PD) and fully depleted (FD) SOI MOSFET fabricated in a 0.13 mm SOI CMOS technology. A simple model to study the behavior of the gate voltage at ZTC (V ZTC ) is proposed in the linear and the saturation region. The in

Influence of glass addition and sinterin

Influence of glass addition and sintering temperature on the structure, mechanical properties and dielectric strength of high-voltage insulators

✍ Muthafar F. Al-Hilli; Kalid T. Al-Rasoul 📂 Article 📅 2010 🏛 Elsevier Science ⚖ 597 KB

Soda-lime glass as a substituent for the feldspar was used to prepare high-tension electrical porcelain by standard chemical solid reaction technique. The effect of glass substitution and sintering temperature on the physical properties, microstructure, hardness, modulus of rupture, flexural strengt

On the influence of reflection of electr

On the influence of reflection of electrons on colt-ampere characteristics of high-voltage glow discharge with hollow anode: Ya Y Udris et al, Zh Tekh Fiz, 44 (1), 1974, 213–215 (in Russian)

📂 Article 📅 1975 🏛 Elsevier Science 🌐 English ⚖ 158 KB

The Theory of the Low-Pressure, High-Cur

The Theory of the Low-Pressure, High-Current Discharge Column: The Influence of the Degree of Ionization and of the Neutral Gas Temperature on the Radial Profiles of the Charged Particle Density, the Neutral Gas Density, and on the Electron Temperature

✍ H.-B. Valentini 📂 Article 📅 1979 🏛 John Wiley and Sons 🌐 English ⚖ 872 KB