## Abstract Electrochemical polarization and impedance spectroscopic (EIS) techniques were used to investigate the corrosion behavior of Ti‐5Al‐2Nb‐1Ta alloy in Hanks solution at different immersion periods (0 h, 120 h, 240 h and 360 h). The impedance spectra are fitted using a non‐linear least squ
Influence of microstructure on corrosion behavior of Ti–5%Ta–1.8%Nb alloy
✍ Scribed by R. Mythili; A. Ravi Shankar; S. Saroja; V. R. Raju; M. Vijayalakshmi; R. K. Dayal; V. S. Raghunathan; R. Balasubramaniam
- Publisher
- Springer
- Year
- 2007
- Tongue
- English
- Weight
- 687 KB
- Volume
- 42
- Category
- Article
- ISSN
- 0022-2461
No coin nor oath required. For personal study only.
📜 SIMILAR VOLUMES
## Abstract Solution treatment and ageing (STA) is an effective strengthening method for α + β titanium alloys. This paper reports the effect of solution treatment and aging on the corrosion behaviour of Ti‐6Al‐7Nb alloy in a simulated body fluid (Ringer's solution). Ti‐6Al‐7Nb alloy is hot rolled
Effect of Ta addition on microstructure and shape memory behavior of a Ti-22 at.%Nb alloy was investigated in order to improve the shape memory and superelastic properties. The mechanical properties and shape memory behavior of Ti-22 at.%Nb-(0-8 at.%)Ta alloys were investigated by tensile tests at v
Al was replaced partially by Nb, Ta and Ti in precipitation-hardened Pt-base alloys, resulting in elevated compression strengths at high temperatures. The polycrystalline Pt-base alloys containing 5 at.% Nb and Ta, respectively, are stronger than the single-crystal Ni-base superalloy CMSX-4 in [0 0
## Abstract A new Ti‐6Al‐2Nb‐1Ta alloy was obtained for to satisfy the mechanical and anticorrosion requirements in neutral corrosive environment. The corrosion behaviour of this new Ti‐6Al‐2Nb‐1Ta alloy in 0.1 M Na~2~SO~4~, 3% NaCl solutions and synthetic sea water was studied in this paper, using