✦ LIBER ✦

Influence of layer microstructure on the corrosion behavior of plasma nitrided cold work tool steel

✍ Scribed by Dong-Cherng Wen

Publisher: Springer
Year: 2009
Tongue: English
Weight: 663 KB
Volume: 45
Category: Article
ISSN: 0022-2461
DOI: 10.1007/s10853-009-4121-4

No coin nor oath required. For personal study only.

📜 SIMILAR VOLUMES

Influence of cold work and sigma phase o

Influence of cold work and sigma phase on the pitting corrosion behavior of 25 chromium super duplex stainless steel in 3.5% sodium chloride solution.

✍ A. Elhoud; H. Ezuber; W. Deans 📂 Article 📅 2010 🏛 John Wiley and Sons 🌐 German ⚖ 671 KB

## Abstract The effect of cold work (up to 16% strain) and sigma phase precipitation (at 850 °C for 10 and 60 min) on the pitting resistance of 25 chromium super duplex stainless steel were investigated in 3.5% sodium chloride solution at 70 and 90 °C. Anodic polarization scans for cold worked samp

Production of tubing in duplex steel VS

Production of tubing in duplex steel VS 22® influence of cold working on mechanical properties behavior in corrosive sour gas and oil environment

✍ J. C. Prouheze; J. C. Vaillant; G. Guntz; B. Lefebvre 📂 Article 📅 1983 🏛 Springer-Verlag ⚖ 840 KB

Influence of cold working on fatigue beh

Influence of cold working on fatigue behavior of stainless steels used for prothesis: Application to the study of wires with small sections

✍ Coquillet, B. ;Vincent, L. ;Guiraldenq, P. 📂 Article 📅 1979 🏛 John Wiley and Sons 🌐 English ⚖ 854 KB

## Abstract Orthodontists mainly use stainless austenitic wires with a wide range of ultimate tensile strength. To characterize the dynamical behavior of these wires, the authors have perfected machines to test materials with their original surface roughness without any prior machining of surfaces.