𝔖 Bobbio Scriptorium
✦   LIBER   ✦

Influence of gelling conditions on mechanical properties of simultaneous interpenetrating polymer networks from epoxy and bismaleimide resins

✍ Scribed by Katsuyoshi Iisaka

Publisher
John Wiley and Sons
Year
1993
Tongue
English
Weight
579 KB
Volume
47
Category
Article
ISSN
0021-8995

No coin nor oath required. For personal study only.

πŸ“œ SIMILAR VOLUMES

DSC study on simultaneous interpenetrati
DSC study on simultaneous interpenetrating polymer network formation of epoxy resin and unsaturated polyester
✍ M. IvankoviΔ‡; N. DΕΎodan; I. BrnardiΔ‡; H. J. Mencer πŸ“‚ Article πŸ“… 2002 πŸ› John Wiley and Sons 🌐 English βš– 204 KB πŸ‘ 2 views

## Abstract A kinetic study on simultaneous interpenetrating polymer network formation of epoxy resin based on diglycidyl ether of Bisphenol A (DGEBA) and unsaturated polyester (UP) was performed by means of differential scanning calorimetry (DSC). Isothermal DSC characterizations of neat resins an

Study on the properties and application
Study on the properties and application of epoxy resin/polyurethane semi-interpenetrating polymer networks
✍ Ying Li; Sufen Mao πŸ“‚ Article πŸ“… 1996 πŸ› John Wiley and Sons 🌐 English βš– 284 KB πŸ‘ 2 views

Damping properties of epoxy resin/polyurethane (EP/PU) semi-interpenetrating polymer networks (IPNs) were studied by the dynamic mechanical analysis (DMA) method. It shows that the semi-IPNs have excellent damping properties at ordinary temperature. The maximum value of tan 6 is about 1 when the wei

Polyetherimide-modified epoxy networks:
Polyetherimide-modified epoxy networks: Influence of cure conditions on morphology and mechanical properties
✍ E. Girard-Reydet; V. Vicard; J. P. Pascault; H. Sautereau πŸ“‚ Article πŸ“… 1997 πŸ› John Wiley and Sons 🌐 English βš– 466 KB πŸ‘ 2 views

The morphologies and mechanical properties of thermoplastic-modified epoxy networks generated through the reaction-induced phase separation procedure were studied as a function of isothermal cure conditions. The selected model system was diglycidyl ether of bisphenol A cured with 4,4-methylenebis [3