✦ LIBER ✦

Influence of dimensional ratios of plates strained in bending on the load at the onset of yielding

✍ Scribed by A. I. Strel'bitskaya

Publisher: Springer US
Year: 1970
Tongue: English
Weight: 124 KB
Volume: 6
Category: Article
ISSN: 1573-8582
DOI: 10.1007/bf00888833

No coin nor oath required. For personal study only.

📜 SIMILAR VOLUMES

The onset of fracture at the tip of a th

The onset of fracture at the tip of a three-dimensional crack in a solid subjected to bending loads

✍ E. Smith 📂 Article 📅 1983 🏛 Elsevier Science 🌐 English ⚖ 397 KB

Nature of singularity for a point load a

Nature of singularity for a point load at the edge of a plate in bending

✍ J. Dundurs; M. Stippes 📂 Article 📅 1967 🏛 Elsevier Science 🌐 English ⚖ 250 KB

Effect of transverse normal strain on th

Effect of transverse normal strain on the bending of thick circular plates on an elastic foundation subjected to surface loads

✍ George Z. Voyiadjis; Peter I. Kattan 📂 Article 📅 1991 🏛 Elsevier Science 🌐 English ⚖ 855 KB

The influence of return bends on velocit

The influence of return bends on velocity ratio in gas-liquid pipe flow

✍ K. Hoang; M.R. Davis 📂 Article 📅 1980 🏛 Elsevier Science 🌐 English ⚖ 345 KB

Influence of the load ratio on the subcr

Influence of the load ratio on the subcritical crack propagation in alumina under cyclic compressive loads

✍ J. M. Sabadell; M. Anglada 📂 Article 📅 1990 🏛 Springer 🌐 English ⚖ 325 KB

Influence of crack closure on the stress

Influence of crack closure on the stress intensity factor in bending plates — A classical plate solution

✍ M. J. Young; C. T. Sun 📂 Article 📅 1992 🏛 Springer Netherlands 🌐 English ⚖ 562 KB

Based on the classical plate theory in conjunction with the assumption of line contact at the compressive edge of a crack face, closed form solutions were presented for a through-the-thickness central crack in an infinite plate subjected to all around bending. The complete solutions were obtained by