Influence of diamond pressing process on corrosion resistance in steel

✍ Scribed by Aiman Eid Al-Rawajfeh; Ubeidulla Al-Qawabeha

• Publisher: Elsevier Science
• Year: 2007
• Tongue: English
• Weight: 581 KB
• Volume: 456
• Category: Article
• ISSN: 0921-5093
• DOI: 10.1016/j.msea.2007.01.070

✦ Synopsis

Diamond pressing (DP) is a finishing treatment method that is used to create necessary parts with certain roughness. It is used to impart certain physical and mechanical properties, such as appearance, corrosion, friction, wear and fatigue resistance. In this work, the influence of diamond pressing process (DPP) on corrosion resistance in A53 steel was studied in HCl solution. Microhardness (MH), microstructure, weight loss and potentiostatic polarization were investigated at pressing forces of 40, 60, 80 and 100 N. Microhardness increases with increasing the applied force to a certain limit (i.e. ∼90 N). The percentage improvements were found to be 30, 17, 13, and -9% for 40, 60, 80 and 100 N pressing forces, respectively. Weight losses decrease with increasing the pressing forces up to 90 N. Corrosion potential and corrosion current decrease with increasing the pressing force reaching a minimum at about 90 N and then begin to increase with increasing the pressing force. Occasionally, high forces caused failure in the microstructure when the prising force exceeded 90 N. Percentage protection against corrosion shows a supporting behaviour.