Influence of corrosion on the interface between zinc phosphate steel fiber and cement
β Scribed by M. Sun; D.-J. Wen; H.-W. Wang
- Publisher
- John Wiley and Sons
- Year
- 2010
- Tongue
- German
- Weight
- 635 KB
- Volume
- 63
- Category
- Article
- ISSN
- 0947-5117
No coin nor oath required. For personal study only.
β¦ Synopsis
Abstract
The interface bond between steel fibers and concrete matrix is a key factor influencing bearing capacity of steel fiber reinforced concrete (SFRC). In order to improve the interface bond strength and corrosion resistance, a kind of method was put forward by depositing zinc phosphate (ZnPh) coating on steel fiber surface in this paper. The corrosion behavior was investigated in 5% NaCl solution by using linear polarization measurement. Microstructure analysis (SEM and EDX) and fiber pullβout test in combination with linear polarization measurement were carried out. The results prove that ZnPh coatings fabricated on the carbon steel surface can not only protect steel fiber against corrosion, but also enhance the mechanical interlocking bonds between fibers and matrix.
π SIMILAR VOLUMES
## Abstract Calcium phosphate cement (CPC) is a widely used bone substitute in the clinic; however, the low strength of CPC limits its utilization. In this study, we investigated mechanical influences of chitosan fiber combined with gelatin on CPC, and examined the biocompatibility of the new compo
## Abstract Chromate, which is known to be an effective corrosion inhibitor in various applications, is contained in cement as a trace element. So far its influence on the corrosion of steel in contact with concrete has not been investigated. However, as the introduction of chromateβreduced cements
## Abstract In this work, the influence of the metallic substrate and zinc layer on the atmospheric corrosion resistance of phosphatized and painted electrogalvanized steels was evaluated. For this purpose two types of electrogalvanized steels were used, one with drawing quality carbon steel as met