✦ LIBER ✦

Influence of chemical treatments on surface properties and adhesion of flax fibre–polyester resin

✍ Scribed by Christophe Baley; Frédéric Busnel; Yves Grohens; Olivier Sire

Book ID: 116378268
Publisher: Elsevier Science
Year: 2006
Tongue: English
Weight: 583 KB
Volume: 37
Category: Article
ISSN: 1359-835X
DOI: 10.1016/j.compositesa.2005.10.014

No coin nor oath required. For personal study only.

📜 SIMILAR VOLUMES

Strength and adhesion characteristics of

Strength and adhesion characteristics of elementary flax fibres with different surface treatments

✍ Roberts Joffe; Jānis Andersons; Lennart Wallström 📂 Article 📅 2003 🏛 Elsevier Science 🌐 English ⚖ 161 KB

The physical properties of the surface o

The physical properties of the surface of apparel made from flax and polyester fibres

✍ Zimniewska, Małgorzata; Michalak, Marina; Krucińska, Izabella; Więcek, Bogusław 📂 Article 📅 2003 🏛 Emerald Group Publishing Limited 🌐 English ⚖ 861 KB

Atmospheric air plasma treatment of poly

Atmospheric air plasma treatment of polyester textile materials. Textile structure influence on surface oxidation and silicon resin adhesion

✍ Frédéric Leroux; Christine Campagne; Anne Perwuelz; Leon Gengembre 📂 Article 📅 2009 🏛 Elsevier Science 🌐 English ⚖ 720 KB

Influence of chemical and plasma treatme

Influence of chemical and plasma treatments on the adhesive properties of PTFE with an epoxy resin

✍ J.P. Badey; E. Espuche; Y. Jugnet; B. Chabert; Tran Minh Duct 📂 Article 📅 1996 🏛 Elsevier Science 🌐 English ⚖ 727 KB

Influence of surface treatment of glass

Influence of surface treatment of glass fibres on the dynamic mechanical properties of epoxy resin composites

✍ S. Keusch; R. Haessler 📂 Article 📅 1999 🏛 Elsevier Science 🌐 English ⚖ 124 KB

Surface modification of extended chain p

Surface modification of extended chain polyethylene fibres to improve adhesion to epoxy and unsaturated polyester resins

✍ P. J. C. Chappell; J. R. Brown; G. A. George; H. A. Willis 📂 Article 📅 1991 🏛 John Wiley and Sons 🌐 English ⚖ 990 KB

## Abstract Extended chain polyethylene fibres have been treated in ammonia and oxygen lo‐pressure gas discharges (plasmas) in order to enhance adhesion to epoxy and unsaturated polyester resins, respectively, and thus significantly improve fibre/resin interfacial properties in fibre‐reinforced pol