✦ LIBER ✦

Influence of ceria and nickel addition to alumina-supported Rh catalyst for propane steam reforming at low temperatures

✍ Scribed by Yan Li; Xiaoxing Wang; Chao Xie; Chunshan Song

Publisher: Elsevier Science
Year: 2009
Tongue: English
Weight: 467 KB
Volume: 357
Category: Article
ISSN: 0926-860X
DOI: 10.1016/j.apcata.2009.01.025

No coin nor oath required. For personal study only.

📜 SIMILAR VOLUMES

Sulfur poisoning of CeO2–Al2O3-supported

Sulfur poisoning of CeO2–Al2O3-supported mono- and bi-metallic Ni and Rh catalysts in steam reforming of liquid hydrocarbons at low and high temperatures

✍ Chao Xie; Yongsheng Chen; Yan Li; Xiaoxing Wang; Chunshan Song 📂 Article 📅 2010 🏛 Elsevier Science 🌐 English ⚖ 866 KB

Preparation and characterization of bime

Preparation and characterization of bimetallic Rh-Ni/Y2O3-Al2O3 for hydrogen production by raw bioethanol steam reforming: influence of the addition of nickel on the catalyst performances and stability

✍ Anthony Le Valant; Nicolas Bion; Fabien Can; Daniel Duprez; Florence Epron 📂 Article 📅 2010 🏛 Elsevier Science 🌐 English ⚖ 714 KB

Methanol steam reforming in supported Pd

Methanol steam reforming in supported Pd membrane reactor The supported Pd membrane is promising for the production of high-purity hydrogen from catalytic steam reforming of methanol. At the 35°C reaction temperature, the catalyst activity and stability are promoted by increasing the alumina content. Here a compact doublejacketed reactor has generated high-purity hydrogen directly from steam reforming of methanol, with no need for external purification and a much higher recovery yield.

📂 Article 📅 2001 🏛 Elsevier Science 🌐 English ⚖ 110 KB

environments was investigated. The corrosion rate is higher under 'outlet' conditions at 700°C compared to standard conditions at 650°C and 'inlet' conditions at 600°C. The corrosion potential increases with time when a protective corrosion layer is formed. Eventually it reaches a more positive pote