๐”– Bobbio Scriptorium
โœฆ   LIBER   โœฆ

Influence of AlN addition on thermal and mechanical properties of cordierite-based glass/ceramic composites

โœ Scribed by Guo-hua Chen; Xin-yu Liu


Publisher
Elsevier Science
Year
2007
Tongue
English
Weight
605 KB
Volume
190
Category
Article
ISSN
0924-0136

No coin nor oath required. For personal study only.

โœฆ Synopsis


Cordierite-based glass/ceramic composites doped with different volume fractions of AlN particles were successfully prepared by hot-pressing process. Thermal and mechanical properties of the composites were also investigated. Results show that the thermal conductivity, the flexural strength and fracture toughness of cordierite-based glass/AlN composites increase with increasing AlN content. The thermal conductivity of the composite doped with 50 vol.% AlN reaches 6.5 W/m K. By incorporation of 40 vol.% AlN, the flexural strength and fracture toughness of the composites increase 81 and 139% compared to the unreinforced cordierite-based glass matrix, respectively. XRD analysis indicated that no chemical reaction occurred between cordierite-based glass and AlN. The main strengthening and toughening mechanisms is load transfer and crack deflection.


๐Ÿ“œ SIMILAR VOLUMES


Effect of additives on the microstructur
โœ Denry, I. L. ;Holloway, J. A. ๐Ÿ“‚ Article ๐Ÿ“… 2002 ๐Ÿ› John Wiley and Sons ๐ŸŒ English โš– 411 KB ๐Ÿ‘ 2 views

## Abstract Previous work has shown that lithium mica glassโ€ceramics were excellent potential candidates as dental ceramics. The purpose of this study was to evaluate the effect of various additives on the microstructure and thermal properties of a mica glassโ€ceramic in the system Li~2~Oโ€K~2~Oโ€SiO~

Effect of heat pressing on the mechanica
โœ Denry, I. L. ;Holloway, J. A. ๐Ÿ“‚ Article ๐Ÿ“… 2004 ๐Ÿ› John Wiley and Sons ๐ŸŒ English โš– 322 KB ๐Ÿ‘ 1 views

## Abstract Previous work has shown that heat pressing of micaโ€based glassโ€ceramics can lead to crystal alignment along the direction of pressing. The purpose of this study was to evaluate the effect of heat pressing on the fracture toughness of micaโ€based glassโ€ceramics. Glass rods (12 ร— 60 mm) we