𝔖 Bobbio Scriptorium
✦   LIBER   ✦

Influence of alkali fiber treatment and fiber processing on the mechanical properties of hemp/epoxy composites

✍ Scribed by Mohammad S. Islam; Kim L. Pickering; Nic J. Foreman

Publisher
John Wiley and Sons
Year
2010
Tongue
English
Weight
860 KB
Volume
119
Category
Article
ISSN
0021-8995

No coin nor oath required. For personal study only.

πŸ“œ SIMILAR VOLUMES

Influence of fiber modification on inter
Influence of fiber modification on interfacial adhesion and mechanical properties of pineapple leaf fiber-epoxy composites
✍ N. Lopattananon; Y. Payae; M. Seadan πŸ“‚ Article πŸ“… 2008 πŸ› John Wiley and Sons 🌐 English βš– 448 KB πŸ‘ 2 views

## Abstract Three kinds of surface treatment, that is, the alkalization (5% w/v NaOH aqueous solution), the deposition of diglycidyl ether of bisphenol A (DGEBA) from toluene solution (1% w/v DGEBA), and the alkalization combined with the deposition of DGEBA (5% w/v NaOH/1% w/v DGEBA) were applied

Effect of fiber treatment on the mechani
Effect of fiber treatment on the mechanical properties of LDPE-henequen cellulosic fiber composites
✍ Pedro J. Herrera-Franco; Manuel de J. Aguilar-Vega πŸ“‚ Article πŸ“… 1997 πŸ› John Wiley and Sons 🌐 English βš– 389 KB πŸ‘ 2 views

The degree of mechanical reinforcement that could be obtained by the introduction of henequen cellulosic fibers in a low-density polyethylene, LDPE, matrix was assessed experimentally. Composite materials of LDPE-henequen cellulosic fibers were prepared by mechanical mixing. The concentration of ran

Unidirectional hemp and flax EP- and PP-
Unidirectional hemp and flax EP- and PP-composites: Influence of defined fiber treatments
✍ A. K. Bledzki; H.-P. Fink; K. Specht πŸ“‚ Article πŸ“… 2004 πŸ› John Wiley and Sons 🌐 English βš– 182 KB

## Abstract In some technical areas, mainly in the automotive industry, glass fiber reinforced polymers are intended to be replaced by natural fiber reinforced polymer systems. Therefore, higher requirements will be imposed to the physical fiber properties, fiber‐matrix adhesion, and the quality as