✍ Scribed by J.M. Chappé; P. Carvalho; S. Lanceros-Mendez; M.I. Vasilevskiy; F. Vaz; A.V. Machado; M. Fenker; H. Kappl; N.M.G. Parreira; A. Cavaleiro; E. Alves
No coin nor oath required. For personal study only.
In this work the oxidation resistance of DC reactive sputtered niobium oxynitrides and its influence on the properties of the films are studied. The depositions have been carried out by DC magnetron sputtering with a reactive gas pulsing process. The nitrogen flow was kept constant and the oxygen flow was pulsed. Pulse durations of 10 s produced multilayer coatings with a period of λ = 10 nm. Three sets of films with increasing duty cycle (= on-time of high oxygen flow / pulse duration) have been deposited. The films were subsequently annealed in air at 400, 500 and 600 °C, respectively.
X-ray diffraction measurements showed a clear and progressive change from a roughly amorphous nature of the films to a crystalline oxidetype compound for those annealed at 600 °C, which was consistent with the composition analysis. For annealing temperatures of 500 and 600 °C, the coatings presented a significant reduction in hardness, approaching the values characteristic of Nb 2 O 5 -type films. Moreover, the residual stress measurements performed by using the deflection method revealed low values in all the coatings nearly independent on the annealing temperature.
Color variation in the CIE -L ⁎ a ⁎ b ⁎ color space and the reflectance in the UV-visible spectrum range of these niobium oxynitrides were investigated and correlated to their chemical composition and structural features. For both properties, the variation tendencies are quite similar, showing the transition from a nitride-type alloy to an oxide-type one with increasing annealing temperature.
📜 SIMILAR VOLUMES
Through micro-arc oxidation, the MgF 2 /ZrO 2 composite coatings were prepared on magnesium at the different applied voltages (in the range of 400-550 V) in a zirconate electrolytic solution. The morphologies, phase components, microhardness, bond strengths, and corrosion resistances of the composit