✦ LIBER ✦

Influence of Acetabular Cup Rim Design on the Contact Stress During Edge Loading in Ceramic-on-Ceramic Hip Prostheses

✍ Scribed by Mathew Mak; Zhongmin Jin; John Fisher; Todd D. Stewart

Book ID: 113468577
Publisher: Elsevier Science
Year: 2011
Tongue: English
Weight: 896 KB
Volume: 26
Category: Article
ISSN: 1532-8406
DOI: 10.1016/j.arth.2009.10.019

No coin nor oath required. For personal study only.

📜 SIMILAR VOLUMES

Effect of cup inclination angle during m

Effect of cup inclination angle during microseparation and rim loading on the wear of BIOLOX® delta ceramic-on-ceramic total hip replacement

✍ Mazen Al-Hajjar; Ian J. Leslie; Joanne Tipper; Sophie Williams; John Fisher; Lou 📂 Article 📅 2010 🏛 John Wiley and Sons 🌐 English ⚖ 478 KB

## Abstract Ceramic‐on‐ceramic (CoC) bearings in total hip replacements (THRs) have shown low wear volumes under standard gait in hip simulator studies. However, clinical reports have indicated variations in wear rates and formation of stripe‐like wear area on the ceramic femoral heads. The aim of

Influence of the acetabular cup position

Influence of the acetabular cup position on hip load during arthroplasty in hip dysplasia

✍ Goran Bicanic; Domagoj Delimar; Marko Delimar; Marko Pecina 📂 Article 📅 2008 🏛 Springer 🌐 English ⚖ 296 KB

The influence of acetabular cup angle on

The influence of acetabular cup angle on the wear of “BIOLOX Forte” alumina ceramic bearing couples in a hip joint simulator

✍ J. E. Nevelos; E. Ingham; C. Doyle; A. B. Nevelos; J. Fisher 📂 Article 📅 2001 🏛 Springer 🌐 English ⚖ 105 KB