𝔖 Bobbio Scriptorium
✦   LIBER   ✦

Increase in critical current density of YBaCuO compounds at 77 K by addition of fluorine

✍ Scribed by F. Sumiyoshi; T. Hamada; S. Kawabata

Publisher
Elsevier Science
Year
1988
Tongue
English
Weight
404 KB
Volume
28
Category
Article
ISSN
0011-2275

No coin nor oath required. For personal study only.

✦ Synopsis

An Y-Ba-Cu-O compound containing a small quantity of added fluorine was developed which exhibited magnetization curves at 77 K very similar to those of practical superconductors used at 4.2 K such as Nb-Ti and Nb3Sn. When formed in bulk, the compound is made up of grains which are closely connected to each other and has uniformly arranged laminated domains. The critical current density, as estimated from the observed magnetization curve at 77 K, was about five times greater than that of pure Y Ba Cu-O compounds.

📜 SIMILAR VOLUMES

Strength and critical current density of
Strength and critical current density of Bi(Pb)SrCaCuO and YBaCuO in silver-sheathed superconducting tapes
✍ S. Ochiai; K. Hayashi; K. Osamura 📂 Article 📅 1992 🏛 Elsevier Science 🌐 English ⚖ 793 KB

The critical current density at 77 K at 0 T and the tensile strength at room temperature of high Tc Bi(Pb)-Sr-Ca-Cu-O and Y-Ba-Cu-O oxides in silver-sheathed tapes prepared by the powder-in-tube method were investigated. The main results can be summarized as follows. (1) The critical current density

Preparation and critical current density
Preparation and critical current density of melt-processed YBaCuO thick films and AgPd-sheathed tapes
✍ K Fischer; G Leitner; G Fuchs; M Schubert; B Schlobach; A Gladun; C Rodig 📂 Article 📅 1993 🏛 Elsevier Science 🌐 English ⚖ 768 KB

Thermal analysis by differential scanning calorimetry (DSC) has shown that melting of YBa2Cu30 x is completed at 1000-1010°C in a nitrogen atmosphere. The N 2 can be exchanged by 02 without solidification of the melt and the solidification starts in 02 below 1000°C in the supercooled melt• Applying