✦ LIBER ✦

Inclined load capacity of suction caissons

✍ Scribed by C. P. Aubeny; S. W. Han; J. D. Murff

Publisher: John Wiley and Sons
Year: 2003
Tongue: English
Weight: 245 KB
Volume: 27
Category: Article
ISSN: 0363-9061
DOI: 10.1002/nag.319

No coin nor oath required. For personal study only.

📜 SIMILAR VOLUMES

Inclined loading capacity of suction pil

Inclined loading capacity of suction piles in sand

✍ S. Bang; K.D. Jones; K.O. Kim; Y.S. Kim; Y. Cho 📂 Article 📅 2011 🏛 Elsevier Science 🌐 English ⚖ 923 KB

A series of centrifuge model tests have been conducted on a model suction pile embedded in sand to evaluate its inclined pull-out loading capacity. This paper describes the centrifuge model tests, the analytical solution, and comparisons between the centrifuge model test results and the analytical p

Impedance of flexible suction caissons

✍ Morten Liingaard; Lars Andersen; Lars Bo Ibsen 📂 Article 📅 2007 🏛 John Wiley and Sons 🌐 English ⚖ 660 KB

Evolution of the bearing capacity of dry

Evolution of the bearing capacity of dry loose sand with inclination of the load applied

✍ Sayed Shaaban 📂 Article 📅 1984 🏛 Elsevier Science 🌐 English ⚖ 235 KB

Pullout capacity of embedded suction anc

Pullout capacity of embedded suction anchors in sand

✍ K.D. Jones; S. Bang; Y. Cho 📂 Article 📅 2007 🏛 Elsevier Science 🌐 English ⚖ 374 KB

An analytical solution has been developed to estimate the horizontal, vertical, and inclined loading pullout capacities of embedded suction anchors in sand. Validation of the analytical solution on pullout capacities has been made through comparisons with the centrifuge model test results. Primary v

Ontogeny of suction feeding capacity in

Ontogeny of suction feeding capacity in snook,Centropomus undecimalis

✍ Wainwright, Peter C. ;Huskey, Stephen H. ;Turingan, Ralph G. ;Carroll, Andrew M. 📂 Article 📅 2006 🏛 John Wiley and Sons 🌐 English ⚖ 283 KB

Finite element modeling of suction ancho

Finite element modeling of suction anchors under combined loading

✍ H. Monajemi; H. Abdul Razak 📂 Article 📅 2009 🏛 Elsevier Science 🌐 English ⚖ 578 KB

Suction anchors are subjected to inclined, quasi-horizontal or quasi-vertical loadings. The type of the structure and depth of water govern the inclination of the load. Under this load condition, suction anchor experiences a combination of horizontal and vertical translations, and rotation. Therefor