𝔖 Bobbio Scriptorium
✦   LIBER   ✦

In vivo study on hydroxyapatite scaffolds with trabecular architecture for bone repair

✍ Scribed by Mark R. Appleford; Sunho Oh; Namsik Oh; Joo L. Ong


Book ID
102873505
Publisher
John Wiley and Sons
Year
2009
Tongue
English
Weight
553 KB
Volume
89A
Category
Article
ISSN
1549-3296

No coin nor oath required. For personal study only.

✦ Synopsis


Abstract

The objective of this research was to investigate the bone formation and angio‐conductive potential of hydroxyapatite (HA) scaffolds closely matched to trabecular bone in a canine segmental defect after 3 and 12 weeks post implantation. Histomorphometric comparisons were made between naturally forming trabecular bone (control) and defects implanted with scaffolds fabricated with micro‐size (M‐HA) and nano‐size HA (N‐HA) ceramic surfaces. Scaffold architecture was similar to trabecular bone formed in control defects at 3 weeks. No significant differences were identified between the two HA scaffolds; however, significant bone in‐growth was observed by 12 weeks with 43.9 ± 4.1% and 50.4 ± 8.8% of the cross‐sectional area filled with mineralized bone in M‐HA and N‐HA scaffolds, respectively. Partially organized, lamellar collagen fibrils were identified by birefringence under cross‐polarized light at both 3 and 12 weeks post implantation. Substantial blood vessel infiltration was identified in the scaffolds and compared with the distribution and diameter of vessels in the surrounding cortical bone. Vessels were less numerous but significantly larger than native cortical Haversian and Volkmann canals reflecting the scaffold architecture where open spaces allowed interconnected channels of bone to form. This study demonstrated the potential of trabecular bone modeled, highly porous and interconnected, HA scaffolds for regenerative orthopedics. © 2008 Wiley Periodicals, Inc. J Biomed Mater Res, 2009


📜 SIMILAR VOLUMES


MicroCT analysis of hydroxyapatite bone
✍ Joshua L. Simon; E. Dianne Rekow; Van P. Thompson; Heather Beam; John L. Ricci; 📂 Article 📅 2008 🏛 John Wiley and Sons 🌐 English ⚖ 338 KB 👁 1 views

## Abstract Recent studies have shown that it is now possible to construct tissue‐engineered bone repair scaffolds with tight pore size distributions and controlled geometries using 3‐D Printing techniques (3DP). This study evaluated two hydroxyapatite (HA) 8‐mm diameter discs with controlled archi

Plasma-sprayed hydroxyapatite coating on
✍ Ning Cao; Jianwen Dong; Qiangxiu Wang; Quansheng Ma; Feng Wang; Huaying Chen; Ch 📂 Article 📅 2009 🏛 John Wiley and Sons 🌐 English ⚖ 706 KB

## Abstract The bioactive hydroxyapatite (HA) coatings were successfully prepared on carbon/carbon composites (C/C) by means of sand‐blasting pretreatment and plasma‐spraying technology. X‐ray diffraction was employed to analyze the phase constitute of the coatings. Meanwhile, the bond strength bet

Osteointegration of titanium and hydroxy
✍ Veronica Borsari; Milena Fini; Gianluca Giavaresi; Lia Rimondini; Ugo Consolo; L 📂 Article 📅 2007 🏛 Elsevier Science 🌐 English ⚖ 359 KB

## Abstract The osteointegration rate of titanium (Ti; TI01) and duplex Ti plus HA (HT01) coating systems with high surface roughness was investigated in healthy, aged, and oestrogen‐deficient sheep. After having evaluated the bone quality, TI01 and HT01 rods were implanted in the tibial diaphyses