๐”– Bobbio Scriptorium
โœฆ   LIBER   โœฆ

In vivo corrosion behavior of Mg-Mn-Zn alloy for bone implant application

โœ Scribed by Liping Xu; Guoning Yu; Erlin Zhang; Feng Pan; Ke Yang


Publisher
John Wiley and Sons
Year
2007
Tongue
English
Weight
550 KB
Volume
83A
Category
Article
ISSN
1549-3296

No coin nor oath required. For personal study only.

โœฆ Synopsis


Abstract

Magnesium alloy has been implanted in rats to investigate the in vivo degradation behavior of magnesium for bone implant application. After 9 weeks postoperation, 100% implants were fixed and no inflammation was observed. Histological analysis showed new bone was formed around magnesium implant and no difference was found in the histological microstructure of the new bone and the cortical bone. A degradation or reaction layer, which was mainly composed of Ca, P, O, and Mg, was formed on the surface of magnesium alloy implants. High Ca content in the degradation layer displayed that magnesium could promote the deposition of Ca. Residual area calculation has showed that 10โ€“17% magnesium alloy implant has been degraded in vivo. Compared with that of the controlled rats, no increase in serum magnesium and no disorder of kidney were observed after 15 weeks postoperation. After 18 weeks postoperation, 100% magnesium implants were fixed and no inflammation was observed. About 54% magnesium implant has degraded in vivo. Element analysis showed that Zn and Mn in Mgโ€Mnโ€Zn alloy distributed homogeneously in the residual magnesium implant, the degradation layer, and the surrounding bone tissue after 18 weeks implantation, indicating that Zn and Mn elements were easily absorbed by bioenvironment. ยฉ 2007 Wiley Periodicals, Inc. J Biomed Mater Res 2007


๐Ÿ“œ SIMILAR VOLUMES


Effect of potential on the corrosion beh
โœ A. M. Al-Mayouf; A. A. Al-Swayih; N. A. Al-Mobarak ๐Ÿ“‚ Article ๐Ÿ“… 2004 ๐Ÿ› John Wiley and Sons ๐ŸŒ German โš– 308 KB ๐Ÿ‘ 1 views

## Abstract The effect of fluoride ion concentration and pH on the corrosion behavior of TCA (60 Ti 10 Ag 30 Cu), which is a new Ti alloy with low melting point, pure Titanium (Ti), and TAV (TiAl6V4) was examined using open circuit potential (OCP) and electrochemical impedance spectroscopy (EIS) at