## Abstract Highly porous poly(D,L‐lactide)/Bioglass® composites scaffolds were prepared by thermally induced phase separation process of polymer solutions and subsequent solvent sublimation. A series of composite foams with different polymer/Bioglass® weight ratios was prepared to study the influe
In vitro evaluation of novel bioactive composites based on Bioglass®-filled polylactide foams for bone tissue engineering scaffolds
✍ Scribed by J. J. Blaker; J. E. Gough; V. Maquet; I. Notingher; A. R. Boccaccini
- Publisher
- John Wiley and Sons
- Year
- 2003
- Tongue
- English
- Weight
- 692 KB
- Volume
- 67A
- Category
- Article
- ISSN
- 1549-3296
No coin nor oath required. For personal study only.
✦ Synopsis
Abstract
Highly porous poly(DL‐lactic acid) (PDLLA) foams and Bioglass®‐filled PDLLA composite foams were characterized and evaluated in vitro as bone tissue engineering scaffolds. The hypothesis was that the combination of PDLLA with Bioglass® in a porous structure would result in a bioresorbable and bioactive composite, capable of supporting osteoblast adhesion, spreading and viability. Composite and unfilled foams were incubated in simulated body fluid (SBF) at 37°C to study the in vitro degradation of the polymer and to detect hydroxyapatite (HA) formation, which is a measure of the materials' in vitro bioactivity. HA was detected on all the composite samples after incubation in SBF for just 3 days. After 28 days immersion the foams filled with 40 wt % Bioglass® developed a continuous layer of HA. The formation of HA for the 5 wt % Bioglass®‐filled foams was localized to the Bioglass® particles. Cell culture studies using a commercially available (ECACC) human osteosarcoma cell line (MG‐63) were conducted to assess the biocompatibility of the foams and cell attachment to the porous substrates. The osteoblast cell infiltration study showed that the cells were able to migrate through the porous network and colonize the deeper regions within the foam, indicating that the composition of the foams and the pore structures are able to support osteoblast attachment, spreading, and viability. Rapid formation of HA on the composites and the attachment of MG‐63 cells within the porous network of the composite foams confirms the high in vitro bioactivity and biocompatibility of these materials and their potential to be used as scaffolds in bone tissue engineering and repair. © 2003 Wiley Periodicals, Inc. J Biomed Mater Res 67A: 1401–1411, 2003
📜 SIMILAR VOLUMES
## Abstract **Summary:** Biomimetic scaffolds are appealing products for the repair of bone defects using tissue engineering strategies. The present study prepared novel biomimetic composite scaffolds with similar composite to natural bone using bioactive glass, collagen, hyaluronic acid, and phosp
## Abstract Dynamic flow culture bioreactor systems have been shown to enhance __in vitro__ bone tissue formation by facilitating mass transfer and providing mechanical stimulation. Our laboratory has developed a biodegradable poly (lactic acid glycolic acid) (PLAGA) mixed scaffold consisting of li