In vitro andin vivo studies on bioabsorbable ultra-high-strength poly(L-lactide) rods

✍ Scribed by Matsusue, Yoshitaka ;Yamamuro, Takao ;Oka, Masanori ;Shikinami, Yasuo ;Hyon, Suong-Hyu ;Ikada, Yoshito

• Publisher: John Wiley and Sons
• Year: 1992
• Tongue: English
• Weight: 906 KB
• Volume: 26
• Category: Article
• ISSN: 0021-9304
• DOI: 10.1002/jbm.820261203

✦ Synopsis

U 1 t r ah i g hs t r e n g t h p ol y ( L-1 ac tide) (PLLA) rods were fabricated using a drawing technique. Rods with a diameter of 3.2 mm and a draw ratio of 2 . 5 : l showed initial bending strength and modulus values of 240 MPa and 13 GPa, respectively. The purpose of this study was to investigate the in vitro and in vivo degradation of PLLA rods with a draw ratio of 2.5:l. The greater the rod diameter, the longer the bending strength was maintained in phosphate buffered saline at 37°C. The bending strength retention of rods (diam. 3.2 mm) implanted in the subcutis of rabbits was almost equal to that of rods in the in vitro study, while those rods implanted in the medullary cavity of rabbit femora showed a slightly lower bend-ing strength retention. Molecular weight was reduced to the greatest extent i n the medullary cavity, followed by in the subcutis and in vitro. The weight of PLLA rods in the medullary cavity was reduced by 22% at 52 weeks and by 70% at 78 weeks after implantation. Histologically, no inflammatory or foreign body reaction was observed in the medullary cavity for 52 weeks. The drawn PLLA rods maintained a bending strength exceeding that of human cortical bone in t h e medullary canal for a period of 8 weeks, suggesting that the drawn PLLA rods may be useful in the repair of fractured human bones.