𝔖 Bobbio Scriptorium
✦   LIBER   ✦

In-test crack-opening-displacement calibration

✍ Scribed by W.G. Reuter; C.E. Hartbower

Publisher
Elsevier Science
Year
1972
Tongue
English
Weight
289 KB
Volume
4
Category
Article
ISSN
0013-7944

No coin nor oath required. For personal study only.

πŸ“œ SIMILAR VOLUMES

A crack-opening-displacement technique f
A crack-opening-displacement technique for crack length measurement in fatigue crack growth rate testingβ€”development and evaluation
✍ A.M. Sullivan; T.W. Crooker πŸ“‚ Article πŸ“… 1977 πŸ› Elsevier Science 🌐 English βš– 565 KB

Ahstraet-A crack-o~n~~splacern~t (COD) technique has been successfuity employed to measure crack length in compact tension specimens for the ~te~~t~ of fatigue crack growth rate (FCGR). Details of the COD calibration and comparisons of COD-determined FCGR data with previously established trend lines

Crack tip opening displacement in relati
Crack tip opening displacement in relatively high toughness materials
✍ A. Bhattacharya πŸ“‚ Article πŸ“… 1991 πŸ› Elsevier Science 🌐 English βš– 941 KB

A theoretical model of crack tip opening displacement is presented which is based on a concept of rigid body rotation near the crack tip. The proposed relation is used to obtain the crack tip opening displacement in three point bend specimens of low strength high toughness materials. The rotation fa

Elastic-plastic analysis of crack openin
Elastic-plastic analysis of crack opening displacement at crack center
✍ Shen Wu; Weiyang Huang πŸ“‚ Article πŸ“… 1982 πŸ› Elsevier Science 🌐 English βš– 142 KB

The experimental results show that (I) X, of two thin sheet aluminum alloys are valid; they\_ are I?, = 201.39 kg/mm"\* and l?,, = 208.31 kg/mm"2 of Lyl22c2(1), K, =226.18kg/mm"2 and K,,= 234.55 kg/mm3" of Lc4 -cs; (2) the R-curves of the four thin sheet aluminum alloys are independent of the initia

An approximative crack opening displacem
An approximative crack opening displacement field for embedded cracks
✍ T. Fett πŸ“‚ Article πŸ“… 1989 πŸ› Elsevier Science 🌐 English βš– 381 KB

the application of Cruse and Besuner's method to calculate approximative energy release rates or "averaged weighted stress intensity factors" the crack opening displacement field of the considered crack has to be known for a reference loading case. In this paper an embedded elliptical crack is inves