𝔖 Bobbio Scriptorium
✦   LIBER   ✦

in situ thermal desorption of VOCs in vadose zone soils

✍ Scribed by Karen F. Myers; Richard A. Karn; Dan Y. Eng; Alan D. Hewitt; Ann B. Strong; James M. Brannon


Publisher
John Wiley and Sons
Year
1998
Weight
175 KB
Volume
2
Category
Article
ISSN
1086-900X

No coin nor oath required. For personal study only.

✦ Synopsis


A volatile organic compound (VOC) sampler developed for the site characterization and analysis penetrometer system (SCAPS) program to provide semiquantitative field screening data was evaluated in the laboratory and in the field. The device is based on thermal desorption principles and is capable of sampling in the vadose and capillary zones. Approximately of soil is 5 g desorbed in situ, and the volatilized compounds transferred to the surface, where they are trapped and analyzed by ion trap mass spectroscopy (ITMS). Ex situ validation samples from a Mostapΰ―€ core taken away 9 in. from the in situ sample are of two types. One sample is placed in the sampler and desorbed and analyzed in the same manner as the in situ sample. The second validation sample is preserved in methanol and analyzed off site by GC/MS. Comparisons of in situ data to ex situ validation data show that subsurface heterogeneity strongly affects correlation, especially in zones of bedded sand and silt. When the two ex situ samples from the Mostapΰ―€ core are compared, the subsurface heterogeneity factor is removed and the co-efficient of determination (r 2 ) increases to 85%.


πŸ“œ SIMILAR VOLUMES


Sensitivity of soil parameters in unsatu
✍ J. Mertens; H. Madsen; M. Kristensen; D. Jacques; J. Feyen πŸ“‚ Article πŸ“… 2005 πŸ› John Wiley and Sons 🌐 English βš– 349 KB

Simulation of soil moisture content requires effective soil hydraulic parameters that are valid at the modelling scale. This study investigates how these parameters can be estimated by inverse modelling using soil moisture measurements at 25 locations at three different depths (at the surface, at 30