In situ synthesized TiC/Ti5Si3 nanocomposites by high-energy mechanical alloying: Microstructural development and its mechanism
✍ Scribed by Dongdong Gu; Wilhelm Meiners; Chuang Li; Yifu Shen
- Publisher
- Elsevier Science
- Year
- 2010
- Tongue
- English
- Weight
- 773 KB
- Volume
- 527
- Category
- Article
- ISSN
- 0921-5093
No coin nor oath required. For personal study only.
✦ Synopsis
In situ synthesis of TiC/Ti 5 Si 3 nanocomposites powder was performed by high-energy ball milling of a Ti-SiC powder mixture having an 8:3 molar ratio. The 25 h milled final product was featured by the nanocrystalline Ti 5 Si 3 matrix reinforced with the uniformly dispersed TiC nanoparticles. The crystalline size of the in situ formed Ti 5 Si 3 and TiC constituents was ∼14 and ∼8 nm, respectively. The evolutions of constitution phases and particle structures of the milled powders were studied and the predominant mechanisms behind the microstructural developments were elucidated. It showed that the disappearance of X-ray diffraction peaks of SiC in the milling system was significantly behind the disappearance of Ti peaks. The SiC constituent decomposed gradually within 25 h of milling, while the Ti constituent reacted speedily after a relatively short time of 10 h. The structures of the milled TiC/Ti 5 Si 3 nanocomposites powders experienced a successive change: pre-refining -coarsening -re-refining on increasing the applied milling time, due to the competitive action between the mechanisms of cold-welding and fracturing. The plastic deformation and cold-welding occurred at the initial milling stage where the ductile Ti element existed. Only fracturing of the particles was operative in a long-term milling system (≥15 h), due to the formation of brittle intermetallic compound Ti 5 Si 3 and ceramic compound TiC. The refinement of the milled powder particles was based on a layered fracturing mechanism.