✦ LIBER ✦

In situ Synthesis of Hard and Conductive Ceramic Composites From Al and ZrO2 Mixtures by Reaction Hot-pressing

✍ Scribed by Xiaoli Zhe; A. Hendry

Book ID: 110238504
Publisher: Springer
Year: 1998
Tongue: English
Weight: 98 KB
Volume: 17
Category: Article
ISSN: 0261-8028
DOI: 10.1023/a:1006601230523

No coin nor oath required. For personal study only.

📜 SIMILAR VOLUMES

Physical and Mechanical Properties of Bu

Physical and Mechanical Properties of Bulk Ta4AlC3 Ceramic Prepared by an In Situ Reaction Synthesis/Hot-Pressing Method

✍ Chunfeng Hu; Zhijun Lin; Lingfeng He; Yiwang Bao; Jingyang Wang; Meishuan Li; Ya 📂 Article 📅 2007 🏛 John Wiley and Sons 🌐 English ⚖ 771 KB

Microstructure and properties of Ti3AlC2

Microstructure and properties of Ti3AlC2 prepared by the solid–liquid reaction synthesis and simultaneous in-situ hot pressing process

✍ X.H Wang; Y.C Zhou 📂 Article 📅 2002 🏛 Elsevier Science 🌐 English ⚖ 416 KB

Microstructure and mechanical behavior o

Microstructure and mechanical behavior of NixAly–Al2O3 in situ composites by pre-oxidation followed by hot-pressed reactive sintering

✍ L.M. Peng; J.H. Wang; H. Li; M. Gong 📂 Article 📅 2006 🏛 Elsevier Science 🌐 English ⚖ 676 KB

In situ synthesis of ZrC particles and i

In situ synthesis of ZrC particles and its formation mechanism by self-propagating reaction from Al–Zr–C elemental powders

✍ M.S. Song; B. Huang; M.X. Zhang; J.G. Li 📂 Article 📅 2009 🏛 Elsevier Science 🌐 English ⚖ 839 KB

ZrC particles were fabricated via self-propagating high-temperature synthesis (SHS) from 0 to 40 mass% Al-Zr-C elemental powder mixtures. The typical layered structures of the reaction products were observed due to the non-steady-state oscillatory motion of the combustion wave. With the Al content i