✦ LIBER ✦

In situ synthesis and thermal, tribological properties of thermosetting polyimide/graphene oxide nanocomposites

✍ Scribed by Hong Liu; Yuqi Li; Tingmei Wang; Qihua Wang

Publisher: Springer
Year: 2011
Tongue: English
Weight: 666 KB
Volume: 47
Category: Article
ISSN: 0022-2461
DOI: 10.1007/s10853-011-5975-9

No coin nor oath required. For personal study only.

📜 SIMILAR VOLUMES

In situ synthesis of graphene/cobalt nan

In situ synthesis of graphene/cobalt nanocomposites and their magnetic properties

✍ Zhenyuan Ji; Xiaoping Shen; You Song; Guoxing Zhu 📂 Article 📅 2011 🏛 Elsevier Science 🌐 English ⚖ 676 KB

Graphene, which possesses unique nanostructure and excellent properties, is considered as a low cost alternative to carbon nanotubes in nanocomposites. In this study, we present a simple in situ approach for the deposition of cobalt (Co) nanoparticles onto surfaces of graphene sheets by hydrazine hy

One-step synthesis of NH2-graphene from

One-step synthesis of NH2-graphene from in situ graphene-oxide reduction and its improved electrochemical properties

✍ Linfei Lai; Luwei Chen; Da Zhan; Li Sun; Jinping Liu; San Hua Lim; Chee Kok Poh; 📂 Article 📅 2011 🏛 Elsevier Science 🌐 English ⚖ 891 KB

Graphene oxide (GO) is reduced and functionalized with primary amine by a one-pot solvothermal process using ethylene glycol as solvent and ammonia water as nitrogen precursor at 180 °C for 10 h. The reaction is featured by nucleophilic substitution of -COOH and C-O-C groups by the ammonia radicals.

Properties of Waterborne Polyurethane/Fu

Properties of Waterborne Polyurethane/Functionalized Graphene Sheet Nanocomposites Prepared by an in situ Method

✍ Yu Rok Lee; Anjanapura V. Raghu; Han Mo Jeong; Byung Kyu Kim 📂 Article 📅 2009 🏛 John Wiley and Sons 🌐 English ⚖ 640 KB

## Abstract Nanocomposites of waterborne polyurethane (WPU) with functionalized graphene sheets (FGS) were prepared by an in situ method. The morphology observed by transmission electron microscopy showed that pristine nanosize FGS can be finely dispersed in a WPU matrix so that it can efficiently

In Situ Polymerized Carbon Nanotube/Poly

In Situ Polymerized Carbon Nanotube/Polyimide Nanocomposites: Effect of Reaction Stoichiometry on the Glass Transition Properties of the Nanocomposites

✍ Dae Hwan Kim; You- Yeon Won 📂 Article 📅 2011 🏛 John Wiley and Sons 🌐 English ⚖ 538 KB

## Abstract A series of in situ polymerized CNT/PI nanocomposite materials synthesized at a fixed diamine‐to‐dianhydride monomer feed ratio with varying concentrations of added –COOH‐ functionalized CNT is studied. It is found that the glass transition temperature of the nanocomposite varies non‐mo

Preparation and mechanical and electrica

Preparation and mechanical and electrical properties of graphene nanosheets–poly(methyl methacrylate) nanocomposites via in situ suspension polymerization

✍ Jingchao Wang; Huating Hu; Xianbao Wang; Chunhui Xu; Min Zhang; Xiaopeng Shang 📂 Article 📅 2011 🏛 John Wiley and Sons 🌐 English ⚖ 804 KB

Graphene nanosheets-poly(methyl methacrylate) (GNS-PMMA) nanocomposites were first prepared by in situ suspension polymerization and reduction of graphene oxide using hydrazine hydrate and ammonia. PMMA microspheres with a mean diameter of 2 lm are mainly covalently link to the surface of GNS. The o

Synthesis and properties of polystyrene–

Synthesis and properties of polystyrene–clay nanocomposites via in situ intercalative polymerization

✍ Rongrong Qi; Xing Jin; Jinghui Nie; Wei Yu; Chixing Zhou 📂 Article 📅 2005 🏛 John Wiley and Sons 🌐 English ⚖ 145 KB 👁 2 views

## Abstract Organophilic montmorillonite (MMT) was prepared by ion exchange between Na^+^ ions in the clay and twin benzyldimethyloctadecylammonium bromine cations in an aqueous medium. The organophilic MMT particles were easily dispersed and swollen in styrene monomer. Polystyrene–MMT nanocomposit