In situ neutron diffraction study of residual stress development in MgO/SiC ceramic nanocomposites during thermal cycling
✍ Scribed by Nick Wain; Paolo G. Radaelli; Richard I. Todd
- Publisher
- Elsevier Science
- Year
- 2007
- Tongue
- English
- Weight
- 726 KB
- Volume
- 55
- Category
- Article
- ISSN
- 1359-6454
No coin nor oath required. For personal study only.
✦ Synopsis
Ceramic nanocomposites often contain large residual stresses due to differing thermal contraction between phases upon cooling from processing temperatures. Their role in affecting the mechanical properties is not fully understood, but is certainly of importance. This investigation used neutron diffraction to quantify the residual stresses in MgO/SiC nanocomposites throughout a thermal cycle to 1550 °C. The results showed that average stresses in 10 vol.% SiC samples at 100 °C approached À4 GPa in the particles and were +560 MPa in the matrix. The stresses showed good agreement with an elastic model with a stress-free temperature of 1600 °C. A small amount of inelastic relaxation (15%) was observed after cooling back to room temperature. Modelling suggested that this was due to relaxation of the stresses in grain boundary particles at a rate limited by diffusional processes in the MgO/SiC interface. The effect of particle size on stress level is discussed.