✦ LIBER ✦

In situ fiber strength in carbon-carbon composites

✍ Scribed by G.S Rellick; R.J Zaldivar

Publisher: Elsevier Science
Year: 1992
Tongue: English
Weight: 278 KB
Volume: 30
Category: Article
ISSN: 0008-6223
DOI: 10.1016/0008-6223(92)90093-c

No coin nor oath required. For personal study only.

📜 SIMILAR VOLUMES

Increased Interface Strength in Carbon F

Increased Interface Strength in Carbon Fiber Composites through a ZnO Nanowire Interphase

✍ Yirong Lin; Gregory Ehlert; Henry A. Sodano 📂 Article 📅 2009 🏛 John Wiley and Sons 🌐 English ⚖ 763 KB

Vapor-grown carbon-fiber reinforced carb

Vapor-grown carbon-fiber reinforced carbon composites

✍ Jyh-Ming Ting; Max L. Lake 📂 Article 📅 1995 🏛 Elsevier Science 🌐 English ⚖ 710 KB

Vapor-grown carbon-fiber (VGCF) reinforced carbon (VGCF-C) composites were studied for thermal and physical properties. Effect of fiber volume fraction and final density of composite on thermal conductivity was investigated. The fiber volume fractions range from 25 v/o to 36% and the final densitie

139. High strength and modulus carbon-ca

139. High strength and modulus carbon-carbon composites

✍ J Hill; E.J Walker; C.R Thomas 📂 Article 📅 1973 🏛 Elsevier Science 🌐 English ⚖ 136 KB

Carbon fiber cardanol-epoxy composites

✍ Ton That Minh Tan; Nguyen Huu Nieu 📂 Article 📅 1996 🏛 John Wiley and Sons 🌐 English ⚖ 544 KB

Carbon fiber composites based on tetrafunctional epoxy resin N,N,N,N-tetraglycidyl-2,2bis[4-(4-aminophenoxy)phenyl]propane modified with cardanol were investigated. The differential scanning calorimetric technique was used to study the curing reaction of the neat resins. The dielectric properties of

225. Anisotropic percolation in carbon f

225. Anisotropic percolation in carbon fiber polymer composites

✍ F. Carmona; F. Barreau; P. Delhaes 📂 Article 📅 1982 🏛 Elsevier Science 🌐 English ⚖ 143 KB

The work-of-fracture (ywOF) of carbon-carbon composites was measured for composites with 3-D woven fiber preforms, carbon felts, and chopped fibers. Maximum values were observed for the 3-D preforms and minimum values for the carbon felts. The values are also compared with similar data for graphites

4600572 Ultrahigh strength carbon fibers

✍ Tohru Hiramatsu; Yohji Matsuhisa; Tomitake Higuchi 📂 Article 📅 1987 🏛 Elsevier Science 🌐 English ⚖ 113 KB