𝔖 Bobbio Scriptorium
✦   LIBER   ✦

Improvements in total hip prosthesis implantation technique

✍ Scribed by B. G. Weber; G. Stühmer


Publisher
Springer
Year
1979
Tongue
English
Weight
398 KB
Volume
93
Category
Article
ISSN
1434-3916

No coin nor oath required. For personal study only.

✦ Synopsis


The anchorage of the femoral component of a total hip prosthesis can be improved by the following two refinements to the surgical technique: 1. The femoral medullary cavity is plugged with a bone core taken from the excised femoral head or with a polyethylene bung. The plug prevents the bone cement from being displaced distally into the lower part of the medullary cavity. It contains a small hole through which blood can escape, thus preventing the latter from accumulating in the upper part of the medullary cavity and impairing the bond between the cement and the bone wall of the cavity. 2. The greater trochanter is no longer sliced off with a single cut in one plane but is now removed by dihedral osteotomy, i.e., by making cuts in two planes which intersect each other so as to form a ridge. On compressing this osteotomy by tension band fixation all movement between the fragments is eliminated, including that in the parasagittal plane which results from flexion and extension of the hip. In this manner loosening and pseudarthrosis of the osteotomy are prevented.


📜 SIMILAR VOLUMES


Improved cementation in total hip replac
✍ K. Søballe; F. Christensen 📂 Article 📅 1987 🏛 Springer 🌐 English ⚖ 358 KB

Insufficient cementation has been suggested to be the most common cause of loosening of the femoral component after total hip arthroplasty A clinical and radiographic study of 129 consecutive, primary total hip replacements was performed 5 years after surgery, in order to evaluate the significance o

Fatigue properties of implant materials
✍ Ducheyne, P. ;Wevers, M. ;De Meester, P. 📂 Article 📅 1983 🏛 John Wiley and Sons 🌐 English ⚖ 689 KB

The determination of the fatigue properties on small specimens is not accurate. It does not take into account the considerable scatter in fatigue properties which may arise in the implants. Therefore, testing of the properties on the actual implant is needed. The working hypothesis of the present ar