✦ LIBER ✦

Improvement of the mechanical properties of austenitic stainless steel after plasma nitriding

✍ Scribed by E. Menthe; A. Bulak; J. Olfe; A. Zimmermann; K.-T. Rie

Book ID: 108422803
Publisher: Elsevier Science
Year: 2000
Tongue: English
Weight: 486 KB
Volume: 133-134
Category: Article
ISSN: 0257-8972
DOI: 10.1016/s0257-8972(00)00930-0

No coin nor oath required. For personal study only.

📜 SIMILAR VOLUMES

Microstructural characterization of plas

Microstructural characterization of plasma nitrided austenitic stainless steel

✍ X.L. Xu; L. Wang; Z.W. Yu; Z.K. Hei 📂 Article 📅 2000 🏛 Elsevier Science 🌐 English ⚖ 531 KB

TEM studies of plasma nitrided austeniti

TEM studies of plasma nitrided austenitic stainless steel

✍ D. STRÓŻ; M. PSODA 📂 Article 📅 2010 🏛 John Wiley and Sons 🌐 English ⚖ 482 KB

Nitriding of austenitic stainless steel

Nitriding of austenitic stainless steel by plasma immersion ion implantation

✍ G.A. Collins; R. Hutchings; K.T. Short; J. Tendys; X. Li; M. Samandi 📂 Article 📅 1995 🏛 Elsevier Science 🌐 English ⚖ 799 KB

Swelling of 316L austenitic stainless st

Swelling of 316L austenitic stainless steel induced by plasma nitriding

✍ J. C. Stinville; C. Templier; P. Villechaise; L. Pichon 📂 Article 📅 2011 🏛 Springer 🌐 English ⚖ 828 KB

Plasma nitriding of AISI 304 austenitic

Plasma nitriding of AISI 304 austenitic stainless steel with pre-shot peening

✍ Lie Shen; Liang Wang; Yizuo Wang; Chunhua Wang 📂 Article 📅 2010 🏛 Elsevier Science 🌐 English ⚖ 943 KB

AISI 304 austenitic stainless steel was plasma nitrided at the temperature ranging from 410 to 520 °C with pre-shot peening. The structural phases, micro-hardness and electrochemical behavior of the nitrided layer were investigated by optical microscopy, X-ray diffraction, micro-hardness testing and

Mechanical properties of zirconia-coated

Mechanical properties of zirconia-coated 316L austenitic stainless steel

✍ M. Atik; S. H. Messaddeq; M. A. Aegerter; J. Zarzycki 📂 Article 📅 1996 🏛 Springer 🌐 English ⚖ 616 KB