A method using an optical mouse sensor was developed to monitor the moving velocity of a solid mass. Calibration was carried out using a rotating plate. Results clarified that the developed method is useful to monitor the velocity up to some limit (v b 0.3 m/s), which depends on the optical mouse se
Improvement of continuous solid circulation rate measurement in a cold flow circulating fluidized bed
β Scribed by J. Christopher Ludlow; Esmail R. Monazam; Lawrence J. Shadle
- Publisher
- Elsevier Science
- Year
- 2008
- Tongue
- English
- Weight
- 681 KB
- Volume
- 182
- Category
- Article
- ISSN
- 0032-5910
No coin nor oath required. For personal study only.
π SIMILAR VOLUMES
Abstraet--A new approach to the modelling of gross gas-solids flow through the riser in a circulating fluidized-bed system is proposed in this paper. This approach differs from the previous ones, which are found to be theoretically incorrect based on a fundamental analysis of the riser process hydro
A liquid-solid circulating fluidized bed (LSCFB) system consisting of 3.8 cm I.D. and 4 m high riser and 12 cm I.D. and 3.5 m high downcomer was investigated in this study for the continuous polymerization of phenol. Approximately 8.5 kg immobilized particles containing soybean seed hull peroxidase
Electrical conductivity probes were used to measure the radial distributions of solids holdup and liquid velocity in a liquid-solid circulating fluidized bed. These distributions are found to be non-uniform, unlike those in a non-circulating bed. The effects of superficial liquid velocity and partic