✦ LIBER ✦

Improvement in ductility at intermediate temperatures by a small addition of yttrium in a Cu-30%Zn alloy

✍ Scribed by Motohiro Kanno; Noriaki Shimodaira

Book ID: 116062676
Publisher: Elsevier Science
Year: 1987
Weight: 359 KB
Volume: 21
Category: Article
ISSN: 0036-9748
DOI: 10.1016/0036-9748(87)90288-2

No coin nor oath required. For personal study only.

📜 SIMILAR VOLUMES

Improvement in low temperature ductility

Improvement in low temperature ductility of molybdenum by a small addition of nickel

✍ Y. Hiraoka 📂 Article 📅 1998 🏛 Elsevier Science 🌐 English ⚖ 169 KB

Retardation of intergranular fracture at

Retardation of intergranular fracture at intermediate temperatures by a boundary node in a Cu−9 at.% Al alloy tricrystal

✍ Susumo Onaka; Fumihiko Tajima; Satoshi Hashimoto; Sei Miura 📂 Article 📅 1995 🏛 Elsevier Science ⚖ 384 KB

On the strain components in high-tempera

On the strain components in high-temperature creep of a Cu–30% Zn alloy

✍ Sklenička, V. ;Saxl, I. ;Popule, J. ;Čadek, J. 📂 Article 📅 1975 🏛 John Wiley and Sons 🌐 English ⚖ 438 KB

An evidence of high strain rate superpla

An evidence of high strain rate superplasticity at intermediate homologous temperatures in an Al–Zn–Mg–Cu alloy processed by high-pressure torsion

✍ J.M. García-Infanta; A.P. Zhilyaev; A. Sharafutdinov; O.A. Ruano; F. Carreño 📂 Article 📅 2009 🏛 Elsevier Science 🌐 English ⚖ 429 KB

Effect of heat treatments on Cu-Ni 70/30

Effect of heat treatments on Cu-Ni 70/30 alloy pitting susceptibility in sea water at different temperatures

✍ A. M. Beccaria; G. Poggi; Y. Z. Wang 📂 Article 📅 1994 🏛 John Wiley and Sons 🌐 German ⚖ 891 KB

## Abstract A series of experiments was carried out on Cu‐Ni 70/30 commercial alloy specimens presenting different microstructures. The microstructure of homogeneized specimens was modified with annealing treatments by which grain size significantly increased and intermetallic compounds precipitate

Stress corrosion cracking of Cu–30% Zn a

Stress corrosion cracking of Cu–30% Zn alloy in Mattsson’s solutions at pH 7.0 and 10.0 using constant load method – A proposal of SCC mechanism

✍ Rokuro Nishimura; Takehide Yoshida 📂 Article 📅 2008 🏛 Elsevier Science 🌐 English ⚖ 229 KB