The major limitations of the Palmaz-Schatz stent stem from the design of its stent delivery system (SDS). The SDS is bulky and has poor trackability in lesions with proximal tortuosity and/or vessel calcification. The use of bare-mounted Palmaz-Schatz stents on low profile balloons represents an alt
Improved technique for use of half-stents remounted on a stent delivery system
β Scribed by Feldman, Ted ;Kabour, Ameer ;Carroll, John D. ;Levin, Thomas N.
- Publisher
- John Wiley and Sons
- Year
- 1996
- Tongue
- English
- Weight
- 406 KB
- Volume
- 39
- Category
- Article
- ISSN
- 0098-6569
No coin nor oath required. For personal study only.
β¦ Synopsis
The use of half-length intracoronary Johnson & Johnson stents has been described in a number of settings. Half-stents are useful for very short lesions, avoidance of bifurcations or side-branches, ostial stenosis, covering gaps between adjacent stents, and for dissection adjacent to stents caused by postdilatation. Previously described methods for use of half-stents have involved bare stents, or significant manipulation of either the stent or the delivery sheath for remounted half-stents. We describe a method for halfstent preparation and delivery that does not involve distortion of the stent or the delivery sheath. The risk of stent loss, as can occur with bare stents, is diminished. The geometry of the stent is preserved since it is not expanded and then recrimped, and the end of the delivery sheath is not flared or distorted, which may interfere with stent delivery.
π SIMILAR VOLUMES
## Abstract This report describes a technique for correct positioning of a stent proximal to a bifurcation lesion treated with Vβstents. A second wire passed through the first cell of a stent, the opposite end of the anchor wire technique as first described by Szabo et al, facilitated precise stent
low in our case. When it is difficult to deliver the parent magnet through the common bile duct, the wall stent may help us perform magnet compression anastomosis safely.