𝔖 Bobbio Scriptorium
✦   LIBER   ✦

Impact of Kraft Process Modifications on Eucalyptus globulus Pulping Performance and Polysaccharide Retention

✍ Scribed by Santiago, Ana Sofia; Neto, Carlos Pascoal

Book ID
127395299
Publisher
American Chemical Society
Year
2008
Tongue
English
Weight
479 KB
Volume
47
Category
Article
ISSN
0888-5885

No coin nor oath required. For personal study only.

πŸ“œ SIMILAR VOLUMES

Eucalyptus globulus kraft process modifi
Eucalyptus globulus kraft process modifications: Effect on pulping and bleaching performance and papermaking properties of bleached pulps
✍ AS Santiago; C Pascoal Neto πŸ“‚ Article πŸ“… 2008 πŸ› Wiley (John Wiley & Sons) 🌐 English βš– 277 KB

## Abstract **BACKGROUND:** Increasing the yield of the wood pulping process allows the reduction of specific wood costs. Process modifications with a great impact on pulp yield are the profiling of chemical charges and addition of anthraquinone (AQ). The aim of the present work is to investigate t

Impact of effective alkali and sulfide p
Impact of effective alkali and sulfide profiling on Eucalyptus globulus kraft pulping. Selectivity of the impregnation phase and its effect on final pulping results
✍ Ana S Santiago; C Pascoal Neto; Carla Vilela πŸ“‚ Article πŸ“… 2008 πŸ› Wiley (John Wiley & Sons) 🌐 English βš– 237 KB

## Abstract **BACKGROUND:** __Eucalyptus globulus__ is an important wood source for paper production and, in the last few years, great efforts have been made to assess its chemical specificities and improve the kraft pulping efficiency. Despite the existence of several works concerning mostly the k

Simulating the impact of kraft pulping a
Simulating the impact of kraft pulping and bleaching parameters on Eucalyptus camaldulensis pulp properties using MATLAB
✍ Pedram Fatehi; Shahab Arabshahi; Zainab Ziaee; Raimo O. Malinen; Yonghao Ni πŸ“‚ Article πŸ“… 2010 πŸ› John Wiley and Sons 🌐 English βš– 339 KB

## Abstract In this work, __Eucalyptus camaldulensis__ was evaluated as the raw material for chemical pulp under different pulping and bleaching conditions. The pulping was carried out at different H‐factors, and at different effective alkalis. The resulting pulps were then oxygen delignified and b