Impact behaviour of an oscillator with limiting stops, part I: A parametric study
โ Scribed by D.T. Nguyen; S.T. Noah; C.F. Kettleborough
- Publisher
- Elsevier Science
- Year
- 1986
- Tongue
- English
- Weight
- 776 KB
- Volume
- 109
- Category
- Article
- ISSN
- 0022-460X
No coin nor oath required. For personal study only.
โฆ Synopsis
The impact behaviour of a periodically forced oscillator with limiting stops is considered. Pai'ametric studies are made to examine the influence of the various excitation and physical Variables of the system on the frequency and intensity of contacts with the stops. The results of these studies and those of a companion paper can be utilized in related studies of noise and wear in mechanical systems with clearances.
๐ SIMILAR VOLUMES
Real-life structures often possess piecewise stiffness because of clearances or interference between subassemblies. Such an aspect can alter a system's fundamental free vibration response and leads to complex mode interaction. The free vibration behaviour of an L-shaped beam with a limit stop is ana
This paper presents an investigation into the non-linear behavior of an impact oscillator with the addition of dry friction. The equations that govern the relative motion of the impact oscillator, including the effects of dry friction, are formulated, resulting in a non-conservative, piecewise linea
A limit stop is placed at the elbow of an L-shaped beam whose linear natural frequencies are nearly commensurable. As a result of this hardening device the non-linear system exhibits multiple internal resonances, which involve various degree of coupling between the first five modes of the beam in fr
The non-linear behaviour of a slender beam with an attached mass at an arbitrary position under vertical base excitation is investigated with combination parametric and internal resonances. The governing equation which retains the cubic non-linearities of geometric and inertial type is discretized b
L-leucine containing particles having salbutamol sulphate or sodium chloride as a main component have been produced by an aerosol flow reactor method. In the method, aqueous solute droplets were transferred into a heated laminar flow reactor where droplet drying took place. The geometric number mean