Immobilization of glucose oxidase and acetylcholinesterase onto modified polyamide sorbent
β Scribed by T. Godjevargova; A. Dimov; D. Ivanova
- Publisher
- John Wiley and Sons
- Year
- 1998
- Tongue
- English
- Weight
- 177 KB
- Volume
- 68
- Category
- Article
- ISSN
- 0021-8995
No coin nor oath required. For personal study only.
β¦ Synopsis
Two types of polyamide (PA) sorbents with high specific area were prepared. The effects of solvent type, concentrations of formic acid, and polymer on the porosity characteristics were studied. The sorbent with the highest specific area was obtained by using C 2 H 5 OH{HCOOH solvent (60% HCOOH) and the rest of the experiments were carried out with this type of sorbent. The possibility of applying the PA sorbent as carrier for immobilization of glucose oxidase (GOD) and acetylcholinesterase (AChE) was investigated. In order to increase the active groups content (necessary for enzyme immobilization), the sorbent was modified with dimethylaminoethylmethacrylate (DMAEM) and 2-acrylamido-2-methylpropensulfonic acid. The amount of the active groups introduced during the modification and the degree of hydrophilicity were determined. The quantity of bound protein and relative activity of GOD and AChE immobilized onto unmodified and modified sorbents were studied. Optimum pH and temperature of the immobilized GOD and AChE were also determined. The influence of three phosphoroorganic compounds on the activity of the immobilized AChE was investigated. Tetrachlorvinvos was found to be the strongest inhibitor, while AChE immobilized onto PA sorbent modified with DMAEM showed the highest stability. The possibility of using immobilized GOD and AChE in a flow-injection system for determination of the concentrations of glucose and phosphoroorganic compounds was studied.
π SIMILAR VOLUMES
Membranes of acrylonitrile copolymer and polyamide were modified by radiation grafting of 2-acrylamido-2-methylpropanesulphonic acid and 2-dimethylaminoethyl methacrylate. The effect of irradiation dose (from an electron beam accelerator) and method of introduction of ferrous ions on the grafting de
This article was originally printed with some errors, which we regret. They are corrected below: 1. On page 4001, in the left column, the sentence that starts on line 7 should read: The energy band gap was estimated to be 2.39 eV, which is higher than that of chemically synthesized poly(An-FAn). 30
## Abstract Poly(anilineβ__co__βfluoroaniline) [poly(AnβFAn)] films were electrochemically deposited on indium tin oxide glass plates. The characterization of these conducting copolymer films was carried out with ultravioletβvisible and Fourier transform infrared techniques. The enzyme glucose oxid