𝔖 Bobbio Scriptorium
✦   LIBER   ✦

Ignition and combustion characteristics of two-stage injection diesel spray

✍ Scribed by Kenji Amagai; Yukihiro Hashimoto; Masataka Arai


Publisher
Elsevier Science
Year
1999
Tongue
English
Weight
352 KB
Volume
20
Category
Article
ISSN
0389-4304

No coin nor oath required. For personal study only.


πŸ“œ SIMILAR VOLUMES


Study on combustion characteristics of l
✍ Daiji Kotani; Koji Yoshida; Hideo Shoji; Hidenori Tanaka πŸ“‚ Article πŸ“… 1998 πŸ› Elsevier Science 🌐 English βš– 294 KB

We have investigated combustion characteristics of lean gasoline-air pre-mixture ignited by diesel fuel injection using a high compression direct injection diesel engine. Gasoline was supplied as a uniform lean mixture by using carburetors, and diesel fuel was directly injected into the cylinder. It

Fuel injection characteristics of diesel
✍ M. Mbarawa; B. E. Milton; R. T. Casey; H. Miao πŸ“‚ Article πŸ“… 1999 πŸ› John Wiley and Sons 🌐 English βš– 168 KB

Although dual-fuel (DF) engines using a low cetane number primary fuel such as natural gas (NG) ignited by a pilot diesel spray have been the subject of much investigation over years, there are still many unknown problems related to the fundamental combustion process of two fuels. In this work, a qu

Evaporating spray and flame distribution
✍ Takuo Yoshizaki; Osamu Yamamoto; Keiya Nishida; Hiroyuki Hiroyasu; Mamoru Suzuki πŸ“‚ Article πŸ“… 1997 πŸ› Elsevier Science 🌐 English βš– 378 KB

The characteristics of an evaporating diesel spray and the flame distribution in a combustion chamber of a D.I. diesel engine were investigated by using the laser light technique. The technique used was based on the cxtinctions of two wavelengths of ultraviolet and visible laser light. The transmitt

Study of diesel spray combustion and ign
✍ Hideyuki Akiyama; Hidehiro Nishimura; Yasumitsu Ibaraki; Norimasa Iida πŸ“‚ Article πŸ“… 1998 πŸ› Elsevier Science 🌐 English βš– 850 KB

This study aimed to reduce NO V and soot by creating a more homogeneous lean fuel distribution in a diesel spray using high-pressure fuel injection and a micro-hole nozzle. This injection system shortened the ignition delay, but a homogeneous lean fuel distribution in the diesel spray was not achiev