✦ LIBER ✦

Identification of Physical Phenomena Governing Nucleate Boiling Heat Transfer of Binary Mixtures

✍ Scribed by J. Kern; P. Stephan

Publisher: John Wiley and Sons
Year: 2004
Tongue: English
Weight: 618 KB
Volume: 27
Category: Article
ISSN: 0930-7516
DOI: 10.1002/ceat.200400022

No coin nor oath required. For personal study only.

✦ Synopsis

Abstract

A model based on first principles is presented to compute nucleate boiling heat transfer coefficients. It includes microscale heat and mass transfer phenomena in the so‐called micro region, i.e., the thin film area where the liquid vapor phase interface approaches the wall. The model is verified by comparing calculated to measured heat transfer coefficients. Parameter studies allowed to identify physical phenomena governing the typical reduction of binary mixture heat transfer coefficients compared to the ideal heat transfer coefficient, i.e., the molar average of the heat transfer coefficients of the two pure components of the mixture. These are bubble site density and departure diameter that deviate from the corresponding values of the two pure components. Furthermore, overall heat transfer is decreased by strong concentration gradients in the micro region.

📜 SIMILAR VOLUMES

Pool boiling heat transfer to cryogenic

Pool boiling heat transfer to cryogenic liquids; III. Nucleate boiling data and peak nucleate boiling fluxes for Nitrogen-Oxygen mixtures

📂 Article 📅 1968 🏛 American Institute of Chemical Engineers 🌐 English ⚖ 489 KB 👁 2 views

Bubble behavior and heat transfer during

Bubble behavior and heat transfer during pool boiling of binary mixtures

✍ Toshiaki Inoue; Masanori Monde; Emiko Yamagawa 📂 Article 📅 2005 🏛 John Wiley and Sons 🌐 English ⚖ 758 KB

Heat transfer coefficients were measured during pool boiling of binary mixtures on a heated wire hung horizontally and bubble behavior was simultaneously captured with a high-speed video camera. The experiment was carried out at a pressure of 0.4 and 0.7 MPa for the whole range of mass fractions in

Enhancement of nucleate pool boiling hea

Enhancement of nucleate pool boiling heat transfer in ammonia/water mixtures (Effect of surface-active agent)

✍ Toshiaki Inoue; Masanori Monde; Teruki Kuwahara; Yoshio Teruya 📂 Article 📅 2010 🏛 John Wiley and Sons 🌐 English ⚖ 505 KB

## Abstract Nucleate boiling heat transfer coefficients of ammonia/water mixtures have been measured when a surface‐active agent was added into the mixtures. The experiment has been carried out on a horizontal heated wire at a pressure of 0.4 MPa. The effect of concentration of the ammonia and the

Pool boiling heat transfer in binary mix

Pool boiling heat transfer in binary mixtures of ammonia/water: Effect of heat of dilution and dissolution on heat transfer coefficient

✍ Toshiaki Inoue; Masanori Monde; Yoshio Teruya; Hideki Ikeda 📂 Article 📅 2002 🏛 John Wiley and Sons 🌐 English ⚖ 188 KB

## Abstract Nucleate boiling heat transfer coefficients were measured on a horizontal heated wire during the pool boiling of non‐azeotropic mixtures of ammonia/water. The experiment was carried out at pressures of 0.4 and 0.7 MPa, at heat fluxes below 2.0 × 10^6^ W/m^2^, and over a range of mass fr