✦ LIBER ✦

Identification of material and geometrical parameters for microstructures by dynamic finite element model updating

✍ Scribed by Kun-Nan Chen; Wei-Hsin Gau; Yuh-Chung Hu

Publisher: Springer-Verlag
Year: 2006
Tongue: English
Weight: 816 KB
Volume: 12
Category: Article
ISSN: 0946-7076
DOI: 10.1007/s00542-006-0110-6

No coin nor oath required. For personal study only.

📜 SIMILAR VOLUMES

GEOMETRIC PARAMETERS FOR FINITE ELEMENT

GEOMETRIC PARAMETERS FOR FINITE ELEMENT MODEL UPDATING OF JOINTS AND CONSTRAINTS

✍ J.E. Mottershead; M.I. Friswell; G.H.T. Ng; J.A. Brandon 📂 Article 📅 1996 🏛 Elsevier Science 🌐 English ⚖ 384 KB

The sensitivity method is applied to update finite element models of welded joints and the boundary condition of a cantilever plate. Careful parameterisation is found to be critical in updating joints and boundary conditions, and the merits of geometric parameters are given special consideration. Th

A finite element algorithm for parameter

A finite element algorithm for parameter identification of material models for fluid saturated porous media

✍ R. Mahnken; P. Steinmann 📂 Article 📅 2001 🏛 John Wiley and Sons 🌐 English ⚖ 233 KB 👁 1 views

## Abstract In this contribution an algorithm for parameter identification of geometrically linear Terzaghi–Biot‐type fluid‐saturated porous media is proposed, in which non‐uniform distributions of the state variables such as stresses, strains and fluid pore pressure are taken into account. To this

Experimental investigation of damage evo

Experimental investigation of damage evolution by data-driven stochastic subspace identification and iterative finite element model updating

✍ Andreas S. Kompalka; Stefanie Reese; Otto T. Bruhns 📂 Article 📅 2007 🏛 Springer 🌐 English ⚖ 749 KB

Residual stiffness assessment of structu

Residual stiffness assessment of structurally failed reinforced concrete structure by dynamic testing and finite element model updating

✍ Pin-Qi Xia; James M. W. Brownjohn 📂 Article 📅 2003 🏛 Sage Publications 🌐 English ⚖ 963 KB

Structural parameter identification and

Structural parameter identification and damage detection for a steel structure using a two-stage finite element model updating method

✍ J.R. Wu; Q.S. Li 📂 Article 📅 2006 🏛 Elsevier Science 🌐 English ⚖ 425 KB

A two-stage eigensensitivity-based finite element (FE) model updating procedure is developed for structural parameter identification and damage detection for the IASC-ASCE structural health monitoring benchmark steel structure on the basis of ambient vibration measurements. In the first stage, both

Parameter identification of framed struc

Parameter identification of framed structures using an improved finite element model-updating method—Part I: formulation and verification

✍ Eunjong Yu; Ertugrul Taciroglu; John W. Wallace 📂 Article 📅 2007 🏛 John Wiley and Sons 🌐 English ⚖ 398 KB 👁 2 views