𝔖 Bobbio Scriptorium
✦   LIBER   ✦

Identification of carbides in tool steels by metallic composition measurements

✍ Scribed by R. Piotrkowski; R. A. Versaci

Publisher
Springer
Year
1992
Tongue
English
Weight
171 KB
Volume
11
Category
Article
ISSN
0261-8028

No coin nor oath required. For personal study only.

πŸ“œ SIMILAR VOLUMES

Fracture toughness of carbides in tool s
Fracture toughness of carbides in tool steels evaluated by nanoindentation
✍ Daniel Casellas; Jaume Caro; SΓ­lvia Molas; JosΓ© M. Prado; Isaac Valls πŸ“‚ Article πŸ“… 2007 πŸ› Elsevier Science 🌐 English βš– 940 KB

In this study, the hardness and fracture toughness of different primary carbides present in tool steels have been evaluated by nanoindentation. Toughness was evaluated by the indentation method using Laugier's equation, after experimentally assessing its applicability. The results obtained allow dif

Effect of the minimum quantity lubricati
Effect of the minimum quantity lubrication in high-speed end-milling of AISI D2 cold-worked die steel (62 HRC) by coated carbide tools
✍ M.C. Kang; K.H. Kim; S.H. Shin; S.H. Jang; J.H. Park; C. Kim πŸ“‚ Article πŸ“… 2008 πŸ› Elsevier Science 🌐 English βš– 692 KB

Hybrid coating method Ti-Al-N and Ti-Al-Si-N High-speed end-milling Minimum quantity lubrication (MQL) Tool wear The objective of this paper is to compare the tool performance of Ti 0.75 Al 0.25 N and Ti 0.69 Al 0.23 Si 0.08 N coated carbides end-mills deposited by hybrid coating method, using floo