Hygroscopic properties of densified softwood pellets
β Scribed by Ian D. Hartley; Lisa J. Wood
- Publisher
- Elsevier Science
- Year
- 2008
- Tongue
- English
- Weight
- 344 KB
- Volume
- 32
- Category
- Article
- ISSN
- 0961-9534
No coin nor oath required. For personal study only.
β¦ Synopsis
Hygroscopic properties of densified softwood pellets were examined, namely, equilibrium moisture content and swelling response to different humidities at room temperature. The pellets consisted of sawdust particles of spruce (Picea spp.), Douglas-fir (Pseudotsuga menziesii (Mirb.) Franco)) and lodgepole pine (Pinus contorta Dougl. ex Loud.). They were placed into desiccators of known humidities at room temperature. Moisture content, ovendry basis, was determined and a linear relationship (R 2 ΒΌ 0.972) between equilibrium moisture content and humidity was found between 11% and 80% humidity. At 93% and near-100% humidity, the pellets disintegrated. The swelled diameters of the pellets, based on oven-dry diameter, were found to be non-linear with respect to humidity, and, despite the large statistical variation, the diameters at higher humidities were statistically greater.
π SIMILAR VOLUMES
Samples of smoke from laboratory burning of commercial sawdust-based softwood pellets were analysed by gas chromatography on an aluminium oxide column. Flaming burning was very efficient. Significant emitted hydrocarbons were methane, quantitatively followed by ethene and lower proportions of ethane
Makhana is the popped expanded kernel of the gorgon nut (Euryale ferox) and is used as a delicious food in India. Presently, it is sorted, graded and used as an ingredient of various ready-to-eat products. High volumetric expansion of makhana increases transport cost and makes it too expensive in di
Relative permittivity (K') and loss factor (tan D) of densified hardened cementitious materials with w/c=0.20 and heat treated to 500Β°C prepared with type I, type III, and a special microfine high silica content(MC500) cement have been compared as a function of temperature and frequency. These K' a
The amount of water vapor taken up by an active pharmaceutical ingredient (API) as a function of relative humidity is routinely evaluated to characterize and monitor its "hygroscopicity" throughout the drug development process. In this minireview we address the necessity of going beyond the measurem