✦ LIBER ✦

Hydrogen-doped indium oxide/indium tin oxide bilayers for high-efficiency silicon heterojunction solar cells

✍ Scribed by Barraud, L.; Holman, Z.C.; Badel, N.; Reiss, P.; Descoeudres, A.; Battaglia, C.; De Wolf, S.; Ballif, C.

Book ID: 122732420
Publisher: Elsevier Science
Year: 2013
Tongue: English
Weight: 553 KB
Volume: 115
Category: Article
ISSN: 0927-0248
DOI: 10.1016/j.solmat.2013.03.024

No coin nor oath required. For personal study only.

📜 SIMILAR VOLUMES

Recovery of Indium-tin-oxide/silicon Het

Recovery of Indium-tin-oxide/silicon Heterojunction Solar Cells by Thermal Annealing

✍ Morales-Vilches, A.; Voz, C.; Colina, M.; López, G.; Martín, I.; Ortega, P.; Orp 📂 Article 📅 2014 🏛 Elsevier ⚖ 295 KB

Properties of indium-tin-oxide (ITO)/sil

Properties of indium-tin-oxide (ITO)/silicon heterojunction solar cells by thick-film techniques

✍ H.B. Saim; D.S. Campbell 📂 Article 📅 1987 🏛 Elsevier Science ⚖ 511 KB

Towards high efficiency solution process

Towards high efficiency solution processable inverted bulk heterojunction polymer solar cells using modified indium tin oxide cathode

✍ Xiaohong Chen; Jiaxiang Yang; Lim Yi Xuan Candy Haley; Jiong Lu; Furong Zhu; Kia 📂 Article 📅 2010 🏛 Elsevier Science 🌐 English ⚖ 610 KB

VI-3 efficient heterostructure solar cel

VI-3 efficient heterostructure solar cells of indium tin oxide on silicon

✍ Burk, D.E.; DuBow, J.B.; Sites, J.R. 📂 Article 📅 1976 🏛 IEEE 🌐 English ⚖ 164 KB

Influence of the front contact barrier h

Influence of the front contact barrier height on the Indium Tin Oxide/hydrogenated p-doped amorphous silicon heterojunction solar cells

✍ D. Rached; R. Mostefaoui 📂 Article 📅 2008 🏛 Elsevier Science 🌐 English ⚖ 867 KB

Light-induced effects in indium tin oxid

Light-induced effects in indium tin oxide/n-i-p hydrogenated amorphous silicon solar cells

✍ Min-Koo Han; Wayne A. Anderson; Harold Wiesmann 📂 Article 📅 1983 🏛 Elsevier Science ⚖ 233 KB

Light-induced effects have been studied on hydrogenated amorphous silicon solar cells having an air mass 1 efficiency of 5% -7% and an area of 0.1 -0.2 cm 2. Within 72 h of illumination the open,circuit voltage did not decrease while the fill factor decreased from 0.6 to 0.4 and the short-circuit cu