𝔖 Bobbio Scriptorium
✦   LIBER   ✦

Hydrocracking of Athabasca bitumen: Kinetics of formation of gases

✍ Scribed by Refa Ö. Köseoglu; Colin R. Phillips


Publisher
Elsevier Science
Year
1988
Tongue
English
Weight
538 KB
Volume
67
Category
Article
ISSN
0016-2361

No coin nor oath required. For personal study only.

✦ Synopsis


The kinetics of formation of light, saturated hydrocarbons (C,C,), hydrogen sulphide and a mixture of olefms (C,C,), carbon monoxide, carbon dioxide and pentanes (g) in the hydrocracking of Athabasca bitumen were investigated. Hydrocracking was conducted both in the absence and in the presence of a catalyst (commercially available COO-MoO,/AlzO, or a synthetic Coo-MoO,/TiO,-SiO, catalyst) in a batch reactor at temperatures in the range 620-693 K and at 7.2 MPa initial hydrogen pressure (at 293 K). A model is proposed to describe the formation of gases from bitumen. The reactions are assumed to be first order and irreversible. The activation energies were found to be in the range 111-167 kJ mol-' for the noncatalysed reactions and 21-147 kJmol_' for the catalysed reactions. Both catalysts yielded very low activation energies (44 and 58 kJ mol-', respectively) for the formation of hydrogen sulphide.


📜 SIMILAR VOLUMES


Pyrolysis of pitch derived from hydrocra
✍ M.V. Chandra Sekhar; Marten Ternan 📂 Article 📅 1979 🏛 Elsevier Science 🌐 English ⚖ 745 KB

Results of isothermal and temperature-programmed pyrolysis experiments in an inert atmosphere and at temperatures from 350 to 1000°C are presented. Thermogravimetric techniques using a recording microbalance were employed for following the weight changes occurring during the pyrolysis. Several techn

Effect of reaction variables on the cata
✍ Refa Ö. Köseoglu; Colin R. Phillips 📂 Article 📅 1988 🏛 Elsevier Science 🌐 English ⚖ 433 KB

The effects of catalyst particle size on the hydrocracking reactions of Athabasca bitumen were studied in the presence ofCoO-MoO,/Al,O, catalyst. Six different catalyst particle sizes, namely 3.2,1.7, 1.18,0.6,0.3 and co.15 mm were employed in the hydrocracking reactions. Reducing the catalyst size

Kinetics and product yield distributions
✍ Refa Ö. Köseoḡlu; Colin R. Phillips 📂 Article 📅 1988 🏛 Elsevier Science 🌐 English ⚖ 663 KB

Hydrocracking of Athabasca bitumen was studied in a batch reactor at 620-693 K and at an initial hydrogen pressure of 7.2 MPa (at 293 K). The reaction products were separated into coke, asphaltenes, resins, aromatics, saturates and gases. The reaction time versus product yield curves were obtained f

Sulphoxidation of Athabasca bitumen
✍ Speros E. Moschopedis; James G. Speight 📂 Article 📅 1978 🏛 Elsevier Science 🌐 English ⚖ 378 KB