✦ LIBER ✦

Highly oriented porous graphite film prepared from porous aromatic polyimide film

✍ Scribed by Kaburagi, Yutaka; Aoki, Hazumu; Yoshida, Akira

Book ID: 123440546
Publisher: Elsevier Science
Year: 2012
Tongue: English
Weight: 131 KB
Volume: 50
Category: Article
ISSN: 0008-6223
DOI: 10.1016/j.carbon.2012.06.037

No coin nor oath required. For personal study only.

📜 SIMILAR VOLUMES

Preparation of graphite films from aroma

Preparation of graphite films from aromatic polyimide films and characterization

✍ Kaburagi, Yutaka 📂 Article 📅 2013 🏛 Elsevier Science 🌐 English ⚖ 21 KB

Highly crystallized graphite films prepa

Highly crystallized graphite films prepared by high-temperature heat treatment from carbonized aromatic polyimide films

✍ Yutaka Kaburagi; Yoshihiro Hishiyama 📂 Article 📅 1995 🏛 Elsevier Science 🌐 English ⚖ 459 KB

## Highly crystallized graphite films were prepared by successive heat treatments at 3100°C for 40 minutes and then 3200°C for 23 minutes under atmospheric pressure of pure argon gas from thin carbonized polyimide films. The starting polyimide films were a commercially available Kapton and a labor

Graphite films prepared from carbonized

Graphite films prepared from carbonized polyimide films

✍ Yoshihiro Hishiyama; Akira Yoshida; Yutaka Kaburagi; Michio Inagaki 📂 Article 📅 1992 🏛 Elsevier Science 🌐 English ⚖ 798 KB

Graphitizability of various carbonized polyimide films heat treated at 2950°C was studied by X-ray and magnetoresistance measurements and SEM observation. The films used were commercially available polyimide films, Kapton and Upilex, and two kinds of laboratory-prepared polyimide films. Results obt

Preparation and Properties of Porous Pol

Preparation and Properties of Porous Polyimide Films

✍ Takeichi, Tsutomu; Zuo, Min; Ito, Akihiro 📂 Article 📅 1999 🏛 SAGE Publications 🌐 English ⚖ 545 KB

Graphite carbon foam films prepared from

Graphite carbon foam films prepared from porous polyimide with in situ formed catalytic nickel particles

✍ Yanling Luo; Qingyun Chen; Dan Zhu; Masaru Matsuo 📂 Article 📅 2010 🏛 John Wiley and Sons 🌐 English ⚖ 389 KB

## Abstract This article describes the preparation of porous polyimide composites and carbon foam films with uniform and controllable porous structures, using nickel oleate as a pore‐forming agent and as a precursor for catalyst formation for the carbonization process. Pore formation occurs by a ph

Thermal and electrical conductivity and

Thermal and electrical conductivity and magnetoresistance of graphite films prepared from aromatic polyimide films

✍ Kaburagi, Yutaka; Kimura, Takeshi; Yoshida, Akira; Hishiyama, Yoshihiro 📂 Article 📅 2012 🏛 Elsevier Science 🌐 English ⚖ 136 KB