✦ LIBER ✦

High temperature response of selected microstructures in Fe-Mn-Cr-Cu corrosion resistant alloy cast irons

✍ Scribed by Vinod Kumar

Book ID: 111786216
Publisher: Springer US
Year: 2003
Tongue: English
Weight: 94 KB
Volume: 12
Category: Article
ISSN: 1059-9495
DOI: 10.1361/105994903770342980

No coin nor oath required. For personal study only.

📜 SIMILAR VOLUMES

Effect of boronizing temperature and tim

Effect of boronizing temperature and time on microstructure and abrasion wear resistance of Cr12Mn2V2 high chromium cast iron

✍ Chunmin Li; Baoluo Shen; Guijiang Li; Chao Yang 📂 Article 📅 2008 🏛 Elsevier Science 🌐 English ⚖ 731 KB

High temperature corrosion of Fe-Cr-Mn-a

High temperature corrosion of Fe-Cr-Mn-alloys in H2-H2S and H2-H2O-H2S gas mixtures

✍ Dipl.-Min Panayiotis Papaiacovou; Prof. Dr. Hans Jürgen Grabke; Dipl.-Ing. (FH) 📂 Article 📅 1985 🏛 John Wiley and Sons 🌐 German ⚖ 542 KB

The sulfidation of Fe-20%Cr-30%Mn, Fe-25%Cr-20%Mn and Fe-25%Cr was studied at 700 "C in H2-H2S and the oxidation and sulfidation in H2-H,0-H,S after preoxidation in H,-H,O. The sulfidation rate is strongly increased for the Mn-containing alloys, layers of (Mn,Cr)S and (Mn,Fe)Cr2S4 are formed. Also

Modeling of the corrosion behavior and i

Modeling of the corrosion behavior and its interrelation with the deformation behavior and microstructure in a newly developed 7.5Mn-5Cr-1.5Cu alloy white iron

✍ Patwardhan, A. K. ;Jain, N. C. 📂 Article 📅 1991 🏛 The Minerals, Metals & Materials Society 🌐 English ⚖ 588 KB