✦ LIBER ✦

High temperature oxidation protective chromium-based coatings prepared by IBAD and PACVD methods

✍ Scribed by F. Černý; J. Pitter; S. Konvičková; V. Jech

Publisher: Elsevier Science
Year: 2009
Tongue: English
Weight: 537 KB
Volume: 203
Category: Article
ISSN: 0257-8972
DOI: 10.1016/j.surfcoat.2009.02.049

No coin nor oath required. For personal study only.

✦ Synopsis

IBAD PACVD Chromium nitride

Chromium oxide High temperature oxidation Chromium nitride films were prepared by high energy (90 keV) IBAD method and chromium oxide films were prepared by PACVD method on AISI 316 stainless steel. The chemical composition was evaluated by electron beam microanalysis. The mechanical properties of coatings were tested by Vickers indenter, scratch tester and calotest. The films were hard and exhibited a satisfactory adhesion to the steel substrate. The corrosion resistance of the coatings was tested at 700-1000 °C in oxidizing atmosphere (air). The corrosion kinetics was evaluated by the gravimetric method. The total corrosion exposure was up to 1000 h. The films decreased high temperature oxidation of stainless steel substrates.

📜 SIMILAR VOLUMES

Structure and oxidation behavior of Si–Y

Structure and oxidation behavior of Si–Y co-deposition coatings on an Nb silicide based ultrahigh temperature alloy prepared by pack cementation technique

✍ Xiaodong Tian; Xiping Guo 📂 Article 📅 2009 🏛 Elsevier Science 🌐 English ⚖ 762 KB

In order to improve the oxidation resistance of silicide coatings on Nb silicide based alloys, Y-modified silicide coatings were prepared by co-depositing Si and Y at 1050, 1150 and 1250 °C for 5-20 h, respectively. It has been found that the coatings prepared by co-depositing Si and Y at 1050 and 1