𝔖 Bobbio Scriptorium
✦   LIBER   ✦

High temperature failures of heat resistant steel castings in waste incinerators

✍ Scribed by Dipl.-Ing. W. Steinkusch

Publisher
John Wiley and Sons
Year
1989
Tongue
German
Weight
362 KB
Volume
40
Category
Article
ISSN
0947-5117

No coin nor oath required. For personal study only.

πŸ“œ SIMILAR VOLUMES

Development of thermal sprayed layers fo
Development of thermal sprayed layers for high temperature areas in waste incineration plants
✍ D. Bendix; G. Tegeder; P. Crimmann; J. Metschke; M. Faulstich πŸ“‚ Article πŸ“… 2008 πŸ› John Wiley and Sons 🌐 German βš– 193 KB

## Abstract Corrosion and wear in the hot gas area of thermal energy plants are severe problems, which often cause premature damage of components. In general, the most components of plants are made of materials, which are not stable under corrosive conditions. For corrosion protection (and also wea

High temperature corrosion of metallic m
High temperature corrosion of metallic materials in simulated waste incineration environments at 300–600 Β°C
✍ M. SΓ‘nchez PastΓ©n; M. Spiegel πŸ“‚ Article πŸ“… 2006 πŸ› John Wiley and Sons 🌐 German βš– 192 KB

The durability of the materials employed in waste incineration plants is affected by different factors that together result in severe degradation of the materials. The effects of alloying elements, as well as deposit composition and temperature range are investigated in this work. Different alloys w

In-situ stress analyses during high temp
In-situ stress analyses during high temperature oxidation of mild steel and grey cast iron
✍ S. Corkovic; A. R. Pyzalla πŸ“‚ Article πŸ“… 2004 πŸ› John Wiley and Sons 🌐 German βš– 628 KB

## Abstract For a protective effect of oxide layers their density and their adherence to the substrate are essential. These are determined by the phase composition, the morphology and the strains in the substrate and the oxide layer. In order to determine the development of the phase composition an