✦ LIBER ✦

High-temperature corrosion of structural materials in gaseous ammonia

✍ Scribed by A. S. Osered'ko

Book ID: 104908855
Publisher: Springer
Year: 1980
Tongue: English
Weight: 255 KB
Volume: 15
Category: Article
ISSN: 1573-885X
DOI: 10.1007/bf00722757

No coin nor oath required. For personal study only.

📜 SIMILAR VOLUMES

High temperature corrosion of structural

High temperature corrosion of structural materials under gas-cooled reactor helium

✍ C. Cabet; A. Terlain; P. Lett; L. Guétaz; J.-M. Gentzbittel 📂 Article 📅 2006 🏛 John Wiley and Sons 🌐 German ⚖ 281 KB

## Abstract The Generation IV International Forum has selected six promising nuclear power systems for further collaborative investigations and development. Among these six concepts, two candidates are Gas Cooled Reactors (GCR), namely the Very High Temperature Reactor (VHTR) and the Gas‐cooled Fas

97/03345 High temperature oxidation and

97/03345 High temperature oxidation and high temperature corrosion of metallic materials. II. High temperature corrosion

📂 Article 📅 1997 🏛 Elsevier Science ⚖ 196 KB

data obtained indicate that mixtures of PAHs can exhibit a variety of mutagenic interactions controlled by both the metabolism of the PAHs and by their concentration in the mixture.

The corrosion resistance of steels in ga

The corrosion resistance of steels in gaseous ammonia at a temperature of 150°C

✍ Yu. A. Mushnikov; P. F. Drozhzhin; Z. A. Spelova; I. A. Pagnueva; S. N. Gorodeik 📂 Article 📅 1977 🏛 Springer 🌐 English ⚖ 156 KB

High temperature corrosion of Ni3Al inte

High temperature corrosion of Ni3Al intermetallic phase materials

✍ Dr. U. Brill 📂 Article 📅 1990 🏛 John Wiley and Sons 🌐 German ⚖ 804 KB

## Abstract For several decades the ordered intermetallic phases have been of special interest for structural applications, because they combine good high temperature tensile strength with oxidation resistance even at high temperatures. Significant improvements in microalloying and metallurgical te

Protection of carbon materials from high

Protection of carbon materials from high-temperature gas corrosion

✍ V. I. Zmii; D. N. Ogienko; N. S. Poltavtsev 📂 Article 📅 1996 🏛 Springer 🌐 English ⚖ 264 KB

Influence of the high temperature corros

Influence of the high temperature corrosion by different gaseous environments on the bending strength of Silicon carbide materials

✍ R. Förthmann; A. Naoumidis 📂 Article 📅 1990 🏛 John Wiley and Sons 🌐 German ⚖ 691 KB

## Abstract Starting from silicon carbide tube and plate materials from industrial production, a series of corrosion tests was performed at temperatures between 1100 and 1400°C in different atmospheres containing water vapour, hydrogen, sulfur dioxide, hydrogen sulfide, and hydrogen chloride. Corro