𝔖 Bobbio Scriptorium
✦   LIBER   ✦

High-strength Cu-based bulk glassy alloys in Cu–Zr–Ti and Cu–Hf–Ti ternary systems

✍ Scribed by A Inoue; W Zhang; T Zhang; K Kurosaka

Publisher
Elsevier Science
Year
2001
Tongue
English
Weight
397 KB
Volume
49
Category
Article
ISSN
1359-6454

No coin nor oath required. For personal study only.

📜 SIMILAR VOLUMES

Novel Nanostructure and Deformation Beha
Novel Nanostructure and Deformation Behavior in Rapidly Quenched Cu- (Zr or Hf)-Ti Alloys
✍ J. Saida; H. Kato; A. Inoue; M. Ohnuma 📂 Article 📅 2005 🏛 John Wiley and Sons 🌐 English ⚖ 353 KB 👁 2 views

Novel nanostructure consisting of the metastable nanocrystalline particles embedded in the glassy matrix are reported in the rapidly quenched Cu~60~(Zr or Hf)~30~Ti~10~ alloys. The transformation behavior and mechanical properties in the nanoscale composite alloys are also investigated. The as‐cast

Solid state amorphization in binary TiN
Solid state amorphization in binary TiNi, TiCu and ternary TiNiCu system by mechanical alloying
✍ B.S. Murty; S. Ranganathan; M. Mohan Rao 📂 Article 📅 1992 🏛 Elsevier Science 🌐 English ⚖ 966 KB

An amorphous phase has been synthesized by mechanical alloying in a planetary mill over a nickel content range of 10-70 at.% in the Ti-Ni system and a copper content range of 10-50 at.% in the Ti-Cu system. In the case of ternary Ti-Ni-Cu alloys the glass-forming composition range has been found to

Formation, thermal and mechanical proper
Formation, thermal and mechanical properties of bulk glassy alloys in Zr–Al–Co and Zr–Al–Co–Cu systems
✍ Tao Zhang; Akihisa Inoue 📂 Article 📅 2004 🏛 Elsevier Science 🌐 English ⚖ 99 KB

New Zr-based bulk glassy alloys in Zr-Al-Co and Zr-Al-Co-Cu systems were developed. The largest supercooled liquid region is upto 64 K for the Zr 55 Al 20 Co 25 alloy and 80 K for the Zr 55 Al 20 Co 20 Cu 5 alloy, respectively. Glassy rods with a diameter of 3 mm for the Zr 55 Al 20 Co 25 alloy and