𝔖 Bobbio Scriptorium
✦   LIBER   ✦

High-Strength and -Toughness Electroconductive SiC-Based Composites

✍ Scribed by D. Sciti; L. Silvestroni; A. Balbo; S. Guicciardi; G. Pezzotti

Publisher
John Wiley and Sons
Year
2006
Tongue
English
Weight
323 KB
Volume
8
Category
Article
ISSN
1438-1656

No coin nor oath required. For personal study only.

✦ Synopsis

SiC‐based electroconductive composites containing 10 and 30 vol% MoSi~2~ particles were hot pressed at 1900Β°C. The MoSi~2~ particles, besides increasing the electrical conductivity of the silicon carbide matrix, acted as reinforcement for the material. For the composition containing 30 vol% of MoSi~2~ (see figure), the room‐temperature strength was 825 MPa, the fracture toughness 4.8 MPaΒ·m^0.5^ and the electrical resistivity 1.3Β·10^–3^ OhmΒ·cm.

πŸ“œ SIMILAR VOLUMES

Electroconducting composites based on po
Electroconducting composites based on polyaniline and monomer-swollen polychloroprene
✍ Magali S. Pinho; MΓ‘rcia Dezotti; Marianna M. Gorelova; Bluma G. Soares πŸ“‚ Article πŸ“… 1999 πŸ› John Wiley and Sons 🌐 English βš– 186 KB

Electroconductive polychloroprene (CR)-polyaniline (Pani) composites were prepared by swelling the vulcanized rubber material in aniline followed by immersing the specimen in an aqueous solution of HCl containing ammonium persulfate as the oxidant. The results obtained from surface and volume conduc